CR-10SE 3D Printer: 220x220x265mm Build volume | Linear Rails on X & Y-Axis
$ USD
$ USD
Ship From
Model-2
Please select product attributes before purchasing~~
Ship to
It is expected to arrive within and will cost
$
USD to ship
This item can't be shipped to this Country/Region
Bundles
${ meal.title }
${ meal.skus }
${ sku.name }：
${ skuVal }
$${
meal.price }USD
$${
meal.oldPrice }USD
Quantity
28 Available
Add To Cart
Buy It Now
CR-10SE 3D Printer: 220x220x265mm Build volume | Linear Rails on X & Y-Axis
${propertiesText}
x ${productNum}
Added to the cart
Continue To Shopping
View Cart
CR-10 SE: High-speed printer with a maximum printing speed of 600 mm/s
- Maximum speed 600mm/s, acceleration 8000mm/s²
- X and Y-axis precision guide rails, independent air cooling, smart vibration pattern optimization
- Supports printing resumption after power outage and material outage detection to improve printing success rate.
- Copper-titanium alloy pipe + hardened steel nozzle, can reach 300℃, supports high temperature, high strength, soft and other materials.
- “Sprite” direct drive extruder with dual gears (1:3.5 gear ratio)
- PEI flexible printing substrate
- The CR Touch sensor is fully automatically calibrated; no manual adjustment is required throughout the process.
- Supports USB, LAN, and cloud printing.
- 4.3-inch touch screen, simple UI design.
| K1 | CR-10SE | Ender-3S1 Pro | Ender-3V3 SE | |
| Construction | Open or Closed | DIY- Semi-Assembled | DIY- Semi-Assembled | DIY- Semi-Assembled |
| Build volume | 220x220x250mm | 220x220x265mm | 220x220x270mm | 220x220x250mm |
| Printer size | 355x355x480mm | 490x470x625mm | 490x455x625mm | 349x364x490mm |
| Extruder | Direct drive | “Sprite” direct drive extruder with dual gears | Sprite Direct Drive Dual Gear | 1Sprite Direct Drive |
| Default print speed | 150mm/s | 150mm/s | 180mm/s | |
| Max print speed | max. ≤ 600 mm/s | max. ≤ 600 mm/s | Max 160mm/s | 250mm/s |
| Acceleration | 20,000 mm/s² | 8000mm/s² | 2500mm/s² | |
| Max. nozzle temperature | 300ºC | ≤ 300°C | 300ºC | ≤ 260℃ |
| Max. heatbed temperature | 100℃ | ≤ 110°C | 110ºC | ≤ 100℃ |
| Dual Z-axis | Yes | Yes | Yes | |
| Automatic levelling | Yes, CR Touch | Yes, CR Touch | Automatic with 16-point CR Touch | Yes, CR Touch |
| Interfaces | USB drive, WiFi | USB drive, WiFi | USB-C / SD | SD card |
| Layer Height | 01.-0.35mm | 01.-0.35mm | 0.05 – 0.4 mm | 01.-0.35mm |
| Motherboard | Silent motherboard, 32-bit | Silent motherboard, 32-bit | Silent motherboard, 32-bit | Silent motherboard, 32-bit |
| Screen | 4.3-inch touchscreen | 4.3-inch touchscreen | 4.3-inch touch screen | 3.2-inch color display with a rotary knob |
| Filament sensor | Yes | Yes | Yes | |
| Power Loss Recovery | Yes | Yes | Yes | |
| Build plate | Flexible Magnetic Steel Plate | Flexible build surface | PEI Spring Steel Plate | PC spring steel plate. |
| UI language | English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Mandarin | English, Chinese, Spanish, French, German, Portuguese, Italian, Turkish, Russian |
Chinese, English, German, Spanish, French, Italian, Portuguese, Russian, Turkish | English, French, Portuguese, Turkish, German, Spanish, Italian, Russian, Japanese, Mandarin |
| Operating systems | Windows, Mac OS, Linux | |||
| Rated capacity | 100-120V~, 200-240V~, 50/60Hz, 350W | |||
| Slicing software | Creality Print, Cura, Simplify3D, PrusaSlicer | |||
| File format for slicing | STL, OBJ, 3MF, STEP | |||
カスタマーレビュー
に基づく 9 レビュー
56%
(5)
22%
(2)
11%
(1)
11%
(1)
0%
(0)
Write A Review
Ask A Question
Fynn
This printer is working fine since 4 years now. I never had any issues that aren't coming with time like changing a tube or a nozzle. It has worked so many hours and is still going. At all that for a more than fair price.
Normaly I don't write reviews but this thing deserves more than 4 stars on average so here you got 5.
Also I like that you still support the product with new upgrades and everything! You are doing a great job, Creality!
charles
i like this printer and printing still with it IS just the motherboard the 8 bit is working for long time that is all what i update in the print
__original.jpg)
Sophia Schurr
When the printer arrived, everything about it was amazing. The simple setup, the easy to read instructions, everything was great. For my third printer, (others weren’t from creality) I wanted a larger surface to work with, and it really looked great... until I began leveling the bed. It seemed that either the glass, or metal bed was warped. The middle of the bed was lower than the corners, making the print to be too high in the center, which made it impossible to print anything. I tried to turn the glass over, but it still had the issue. Before I wrote my review, I read another review that had the same issue. Long story short, I will not be ordering from you again.
JBC
When I received my unit, I installed a BLTouch bed leveler only to discover that the small screws that hold the fan cover to the hot end were way over torqued, stripping out the head of the screw rather than break loose. Had to drill it out. Once I got the machine working, it worked fine until I had to replace a clogged nozzle. I then discovered that that to was not only over-torqued, but cross threaded as well at the factory. They said they would send a new hot end, and never did. I bought a new one only to discover that in my efforts to remove the previous cross-threaded head, the frame got slightly tweaked in the process, which now results in about a 5 degree off horizontal striation on all larger prints. Rather than replace the poorly assembled unit, the factory has tried to send me all sorts of work-arounds, none of which work (because the frame is now bent). This whole problem was caused by poor assembly in their factory, they won't replace the unit, nor do they send replacement parts they say they will. Really disappointing, as this is the 7th printer I've purchased from Creality.
Bill
One of the early large format machines that uses actual metal frames for rigidity. Good large scale format We have printed hundreds of hours of large models. Only draw back is the inability to heat the bed to 90-110 deg.
nathan
this printer gives me nothing but trouble. the bed is continually warped. one day the middle is low and the next it is high. the reason is very poor design of the bed. never had these problems with my maker bot which required no bed levelling at all. it seems as we all know the chinese are very bad at design. mostly they just copy others ideas because they arent creative enough to do thier own designing, and if they do its terrible. like this. so go back to what you do best and copy a good design and fix this horrible machine.
$
USD
$
USD
ADD TO CART
BUY IT NOW
Write a review
*Name
*Email
*Body of Review
*Rating
Customer Image
Submit Review
Ask a Question
*Name
*Email
*Question
Submit Question