Buy Creality 3D Printer and Accessoires. Bundles Purchase Take 5-15% OFF!
My Cart

Your Cart is empty

Shop our products

Qty: Total:
Home Collections Ender-2 Pro Dプリンタ
Ender2PRO.jpg
ender 2 pro 3d printer, mini 3d printer kit
Ender-2Promini.jpg
Ender-2PRO-MINI-3.jpg
ender 2 pro 3d printer, mini 3d printer kit
Ender-2PRO.jpg

Ender-2 Pro Dプリンタ

$ USD

$ USD

Ship From
United States
Model-1
Ender-2 PRO

Please select product attributes before purchasing~~

Ship to
It is expected to arrive within and will cost $ USD to ship
This item can't be shipped to this Country/Region
Bundles
${ meal.bage }
${ meal.title }
${ meal.skus }
${ sku.name }:
${ skuVal }
$${ meal.price }USD
$${ meal.oldPrice }USD
Quantity
28 Available
Add To Cart Buy It Now
Ender-2 Pro Dプリンタ
${propertiesText}
x ${productNum}
Added to the cart
Continue To Shopping View Cart
People who bought this item also bought

Ender 2 Pro:ビルドサイズとその他の機能
ビルドサイズ:165 x 165 x 180 mm
レベリング方法:手動レベリング
印刷を再開:サポート
フィラメント検出器:いいえ
ノズル温度:≤260℃
ホットベッド温度:≤80℃
定格電力:150W
印刷速度:≤100mm/ s。平均印刷速度:60mm / s
押出方法:ボーデン押出機
ディスプレイ:12864統合画面。コントロールノブとの相互作用を実現できます。

操作が簡単で、あえて作成できます。新しく発売されたEnder-2 Pro 3dプリンターには、7つのユーザーフレンドリーなデザインがあります。あなたが初心者であっても、あなたはすぐに始めて、あなたの創造性を発揮させることができます。

Ender-2 Pro 3dプリンターは軽量で持ち運び可能で、どこにでも持ち運びできます。4.65kgと軽量で、サイズはデスクトップファンに匹敵します。持ち運びに便利なハンドルを装備し、軽量設計で移動が非常に簡単です。

4ステップのクイックアセンブリ:Ender-2 Proは、簡単なアセンブリのニーズを完全に満たします。この製品は90%プリインストールされた機器です。ネジを7本締めるだけです。今それは正しいです!

カンチレバー構造:シンプルでユニークなカンチレバー構造により、軽量設計が実現します。追加のZ軸固定ブロックにより、より重い負荷と傾斜ポジショニングをサポートし、印刷プロセス全体の安定性を維持できます。

Ender-2PRO: V2.4.S4 Mainboard
Ender-2pro-hw2.4.s4xx-sw2.2.36_165.bin
Download
Ender-2PRO: 4.2.3 Mainboard
Ender-2 ProMarlin2.0.6.1X165HW4.2.3.bin
Download
カスタマーレビュー

に基づく 11 レビュー

64%
(7)
18%
(2)
18%
(2)
0%
(0)
0%
(0)

Write A Review

Ask A Question

Reviews (11) Questions (0)
John
Loud but doable, like your mom.
Max Schmer
This is a phenomenal beginner-level printer for all ages and the print quality is top notch with Prusa Slicer, but it has two similar problems the Ender 3 Pro had: 1) The magnetic bed it comes with is tricky to get prints to stick to it without some kind of adhesion help, such as glue stick or hair spray. A 165x165mm PEI bed or custom cut glass one will serve you much better. 2) The stainless springs are quite weak. There are much stronger yellow springs and silicon socks that fit right into it (see picture) and make it much easier to keep level. Both of these optional (but highly recommended) upgrades will set you back about $20 on Amazon. A huge positive is that it took all of a few minutes to set up from packed in the box to out and printing. All that's required are a few screws set in place, it couldn't be easier. The handle on the top makes it convenient to travel with, especially if you intend to bring it to conventions or on a road trip. All in all, it's a great printer but still makes the same mistakes the Ender 3/Pro did. I still have hope that Creality will start packing their machines with stronger bed springs and a glass or PEI bed instead of the sub-par magnetic ones.

Toby
Purchased from Amazon, my first 3D printer I am pleased with this printer. I ran it for 20 hours before even bothering to print the Ed Benchy model. I bought it because I wanted to get going quickly and easily without assembling an Ender 3 or Voxelab Aquilla. After a little bit of troubleshooting, I had it printing the small rabbit file included on the SD card in no time. With minimal knowledge gained by watching a handful of YouTube videos in the days leading up to delivery. The only complaints I have is the X axis wheels were way too tight from the factory, and adjusting them with the bed on is a bit of a chore, and if you take the bed off to do it, one of the leveling knobs is a bit tricky to put back on. That being said, the wheels had flat spots because it bound in a couple places along the Y axis, but proper adjustment took care of it, and it has not affected print quality The CURA profile for the original Ender 2 works. I print at a speed of 50mm/s. 1.2 and 1.6 nozzle height gives the best prints, but I use 2.8 and 10% infill after performing an experiment with my 3d models I make, just for the sake of saving time.

db
great machine, sad its being discontinued, great price and fast delivery, thank creality
Ieuan Lewis
first printer was so good at small parts, I bought this second printer as a spares machine.
Ariel Kaminski
Great price. Mega fast shipping and really good Creality product - Ender 2. Thank You.

$ USD
$ USD
ADD TO CART BUY IT NOW
Write a review
*Name
*Email
*Body of Review
*Rating
Customer Image
Submit Review
Ask a Question
*Name
*Email
*Question
Submit Question