Official Creality New Upgrade Silent Mainboard V4.2.7
$10 off over $250 code:KSCMP78W
$25 off over $500 code:NRSE9MMX
$ USD
$ USD
Ship From
Apply to
Please select product attributes before purchasing~~
Ship to
It is expected to arrive within and will cost
$
USD to ship
This item can't be shipped to this Country/Region
Bundles
${ meal.title }
${ meal.skus }
${ sku.name }：
${ skuVal }
$${
meal.price }USD
$${
meal.oldPrice }USD
Quantity
28 Available
Add To Cart
Buy It Now
Official Creality New Upgrade Silent Mainboard V4.2.7
${propertiesText}
x ${productNum}
Added to the cart
Continue To Shopping
View Cart
People who bought this item also bought
Creality Silent Mainboard advantages
- Super Quiet: The V4.2.7 mainboard comes with a low decibel and silent TMC2225 driver, which makes the sound of the printer running below 50 dB. Support BL-Touch auto-leveling and filament sensor
- Easy Installation: The firmware for Ender 3 /Ender 3 Pro / Ender 5 comes pre-installed NOW! You just plug them in and start printing!
- How to Flash the Firmware: Prepare an SD card less than 8GB, format it first, and then save the firmware in the SD card, making sure there is only firmware reserved in this card. Then plug the SD card into the card slot, turn on the printer and wait for around 10s, when the progress bar and interface appear, the firmware has been successfully updated.
- More Safer: Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically. The Board is Optimized by Circuit, effectively solving the heating problem.
Notice: Not applicable to Ender 3 Max
If your machine comes with an 8-bit motherboard, please flash the 8-bit motherboard firmware.
If your machine comes with a 32-bit motherboard, please flash the 32-bit motherboard firmware.
カスタマーレビュー
に基づく 54 レビュー
85%
(46)
9%
(5)
4%
(2)
0%
(0)
2%
(1)
Write A Review
Ask A Question
David
The only difficult part of the installation was removing the hotglue from the OEM installation...
After installation I could hardly believe how quiet the Ender 3 became. Now the loudest part of the printer is the power supply fan...
Marek
I have an Ender 3 printer for about 4 years. I decided to replace the motherboard because of the noisy work. I bought a V427 board in good faith that Creality cares about quality. And here's a disappointment ....
Locked EEPROM - it is not possible to change the printer configuration in the basic parameters - Z offset, Z axis screw parameters .... Cannot write anything to eeprom from the printer menu. Mom has her Marlin compilation, you can't upload the firmware either. By what law does creality block such elements, I would not buy if I knew about it. I guess it's good that Americans do not want 5G from them, because if they can do such bad things on the printer board, what would happen gsyby managed the 5g network. Do not buy this CD (maybe the hardware is good, but why should anyone make any claims to software restriction). Regards Upset man !!!!!!!!!!!!!
Phillip Chudley
This is the best upgrade I have performed for my Ender 3 Pro.
Really silent and prints are much better quality than with my original board
Bit fiddly disconnecting from the old board and connecting to the new board, but all worked first time.
The only downside is residents of UK may have difficulty getting this from the official Creality store as UK residents can only chose ship from UK and this board is not available for shipping from UK, luckily I got mine before this new regulation came into force.
Having said that, the official board version 4.2.7 may be available rom other sources other than the Creality store
Mathias
This thingy is nuts!
Just installed it on my Ender 5. The installment was quick and easy.
There was a fault after installing it tho. The extruder was running inverted, which I just fixed by switching the stepper cables
on the Motor from ABCD to DCBA because switching the socket doesnt work (its not bidirectional).
Phillip Chudley
This is the best upgrade I have done to my Ender 3 Pro
Really silent and my prints are better quality as well.
The disconnection / reconnection from the original board to the new board is a little fiddly, but working on one connection at a time worked very well and all worked first time.
Recommended upgrade to the Ender 3 Pro
MN-Bones
Excellent and relatively easy upgrade. My Ender 3 Pro came with the 8-bit V1.1.5 board and sounded like R2D2 when it printed. The 32-bit v4.2.7 just whispers. The greatest installation swap difficulty was removing the glue from the existing connectors and figuring out which of the 2 fan sockets to use (inner is extruder -blue/yellow – and outer is case fan – red/black).
It was plug-and-play, and I could print immediately. My only disappointment was that I couldn’t upgrade to the latest factory firmware “Ender-3 Pro- 4.2.7-
Marlin2.0.1 – V1.0.1 – TMC2225” (no BLTouch - published 29 August 2020). Simply copying the downloaded .bin file to a SD card and booting from it did not load new firmware.
jeff
Q
will this work with the ender 5 plus?
A
Hi, silent board for the ender-5 plus, please check this link: https://www.creality3dofficial.com/products/upgraded-silent-board-with-tmc2208-driver-for-creality-ender-5-plus
$
USD
$
USD
10th anniversary sale
ADD TO CART
BUY IT NOW
Write a review
*Name
*Email
*Body of Review
*Rating
Customer Image
Submit Review
Ask a Question
*Name
*Email
*Question
Submit Question