Impresora 3D Ender-2 Pro

EJE Z reforzado | Fuente de alimentación incorporada | Superficie de impresión magnética | Ventiladores de doble parte | Tamaño de construcción: 165 x 165 x 180 mm

$ 139,00 USD $ 169,00 USD 2021 NEW
10 reviews
Ship From
  • United States
  • Australia
  • Czech Republic
  • United Kingdom
Please select product attributes before purchasing~~
  • Ender-2 PRO
This item can't be shipped to this Country/Region
It is expected to arrive within3 daysand will cost£10to ship
0.00 0.00 2021 NEW

Ender 2 Pro: tamaño de construcción y más características
Tamaño de construcción: 165 x 165 x 180 mm
Método de nivelación: Nivelación manual
Reanudar la impresión: Compatible
Detector de filamentos: No
Temperatura de la boquilla: ≤ 260°C
Temperatura del semillero: ≤ 80°C
Potencia nominal: 150W
Velocidad de impresión: ≤ 100 mm/s. Velocidad media de impresión: 60 mm/s
Método de extrusión: extrusora Bowden
Pantalla: Con una pantalla integrada 12864, puede implementar interacciones con perillas de control.

Fácil de operar y atreverse a crear: Impresora 3D Ender-2 Pro recién lanzada con 7 diseños fáciles de usar. Incluso para los principiantes, puede comenzar rápidamente y dejar que la creatividad fluya.
Ligero y portátil, puede llevar la impresora 3D Ender-2 Pro a todas partes: tan ligera como 4,65 kg, con un tamaño comparable a un ventilador de escritorio. Equipado con un asa fácil de transportar, su diseño ligero hace que sea súper fácil de mover.
Montaje rápido en cuatro pasos: Ender-2 Pro satisface de manera integral sus necesidades de facilidad de montaje. El producto es un dispositivo preinstalado al 90%. Solo necesitas apretar 7 tornillos. ¡Eso es todo!
Estructura en voladizo: La estructura en voladizo simplificada y única ofrece un diseño ligero. Con un bloque fijo adicional del eje Z, puede soportar cargas más pesadas y posicionamiento magro, permaneciendo estable durante todo el proceso de impresión.

Ender-2PRO: 4.2.3 Mainboard
Ender-2 ProMarlin2.0.6.1X165HW4.2.3.bin
Ender-2PRO: V2.4.S4 Mainboard
Customer Reviews

Based on10reviews

  • 70%
  • 20%
  • 10%
  • 0%
  • 0%
Write A Review
Ask A Question
Max Schmer
This is a phenomenal beginner-level printer for all ages and the print quality is top notch with Prusa Slicer, but it has two similar problems the Ender 3 Pro had: 1) The magnetic bed it comes with is tricky to get prints to stick to it without some kind of adhesion help, such as glue stick or hair spray. A 165x165mm PEI bed or custom cut glass one will serve you much better. 2) The stainless springs are quite weak. There are much stronger yellow springs and silicon socks that fit right into it (see picture) and make it much easier to keep level. Both of these optional (but highly recommended) upgrades will set you back about $20 on Amazon. A huge positive is that it took all of a few minutes to set up from packed in the box to out and printing. All that's required are a few screws set in place, it couldn't be easier. The handle on the top makes it convenient to travel with, especially if you intend to bring it to conventions or on a road trip. All in all, it's a great printer but still makes the same mistakes the Ender 3/Pro did. I still have hope that Creality will start packing their machines with stronger bed springs and a glass or PEI bed instead of the sub-par magnetic ones.
Purchased from Amazon, my first 3D printer I am pleased with this printer. I ran it for 20 hours before even bothering to print the Ed Benchy model. I bought it because I wanted to get going quickly and easily without assembling an Ender 3 or Voxelab Aquilla. After a little bit of troubleshooting, I had it printing the small rabbit file included on the SD card in no time. With minimal knowledge gained by watching a handful of YouTube videos in the days leading up to delivery. The only complaints I have is the X axis wheels were way too tight from the factory, and adjusting them with the bed on is a bit of a chore, and if you take the bed off to do it, one of the leveling knobs is a bit tricky to put back on. That being said, the wheels had flat spots because it bound in a couple places along the Y axis, but proper adjustment took care of it, and it has not affected print quality The CURA profile for the original Ender 2 works. I print at a speed of 50mm/s. 1.2 and 1.6 nozzle height gives the best prints, but I use 2.8 and 10% infill after performing an experiment with my 3d models I make, just for the sake of saving time.
great machine, sad its being discontinued, great price and fast delivery, thank creality
Ieuan Lewis
first printer was so good at small parts, I bought this second printer as a spares machine.
Ariel Kaminski
Great price. Mega fast shipping and really good Creality product - Ender 2. Thank You.
Darrell Hatton
Love this! I have a Ender 3 Pro it's an awesome printer!!! But looking for my second printer I decided to go with a smaller one for smaller prints. I am someone who searches for quality, dependability and price before ever purchasing! Read 100s of reviews and watched dozens of videos and decided on my second Creality!!! I wasn't wrong... It's an awesome printer! While I am still getting my settings tuned in, I have had some really great prints. Printed great out of the box though, about 20 min from opening to printing. Now... My delima is... Which Creality am I going to get next???
Impresora 3D Ender-2 Pro
£ 239
Added to the cart