Ender Series Filamento PLA Blanco/Negro/Gris 2KG
- United States
- Czech Republic
- United Kingdom
- Canada
- Australia

- Black+White
- Black
- White
- Gray
- Blue
Blanco / Negro Color Filamento de impresora 3D 1.75 mm PLA Materiales 2KG para impresora 3D 1KG / Rollo
(1) Alta resistencia, buena tenacidad;
(2) La densidad es pequeña, cuando se imprime un modelo de mayor volumen más ligero, ahorre dinero;
(3) Rentable se puede procesar en un amplio rango de temperaturas;
(4) Diámetro de 1.75mm, variaciones + /-0.1mm, redondez +/-0.05mm;
(5) embalaje de carrete de plástico de 1 kg;
(6) Para ser aplicado a una variedad de impresoras 3D, Makerbot, UP plus, Mendel, Prusa, series, etc.
(7) Sin burbuja
(8) Colores: Blanco + Negro
Paquete:
Blanco y Negro / Blanco * 2 / Negro * 2. ( Opción )
Customer Reviews
Based on20reviews
Damián – 2021-12-25 03:22:50 VERIFIED
Answer: Hi, about the printed item could not stick to bed. Please make sure bed leveling before printing. Here're some tips to help: 1. Set the printing speed of the first layer to 20mm/s in the slicing software, and the printing speed and moving speed are slower. At the same time increase the temperature of the hot bed by about 10 degrees, 2. You can add a raft when slicing. If it is still not sticky, it is recommended that you stick a piece of masking paper or apply a layer of solid glue on the platform at the beginning of printing to increase the adhesion. 3.And you could try to turn off the blower fan. When printing the first layer.
Paul Petersen – 2022-04-26 14:38:24 VERIFIED
Answer: The PLA 3D printed materials have tiny holes and cracks that can accommodate harmful germs and bacteria. In addition, the coloring in PLA signifies the presence of an additive that is not food safe.