My Cart

Your Cart is empty

Shop our products

Qty: Total:
Home Collections 235*235mm Ender 3(Pro)Ender-3V2/Ender-3Neo, V2Neo, Ender-3S1(Pro)/Ender-5 Glass Bed
ender 3 glass bed
ender 3 glass bed
ender 3 glass bed
ender 3 glass bed
ender 3 glass bed
ender 3 glass bed

235*235mm Ender 3(Pro)Ender-3V2/Ender-3Neo, V2Neo, Ender-3S1(Pro)/Ender-5 Glass Bed



Ship From
United StatesCanadaEU: TO UK & EU

Please select product attributes before purchasing~~

Ship to
It is expected to arrive within and will cost $ USD to ship
This item can't be shipped to this Country/Region
${ meal.bage }
${ meal.title }
${ meal.skus }
${ }:
${ skuVal }
$${ meal.price }USD
$${ meal.oldPrice }USD
28 Available
Add To Cart Buy It Now
235*235mm Ender 3(Pro)Ender-3V2/Ender-3Neo, V2Neo, Ender-3S1(Pro)/Ender-5 Glass Bed
x ${productNum}
Added to the cart
Continue To Shopping View Cart

Creality Ender 3 Series Glass Bed(235*235mm)

  • Excellent adhesion: Creality art carbon and silicone build surface provide the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.

  • Convenient to use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Clean with water. Easy to remove your print by hand or with a scraper.
  • Customized Designed: Designed with a small Creality logo at the bottom of Tempered Glass to both avoid logo printing marks and remind the model of the printer platform.
  • High-performance: As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
  • Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
  • Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3XEnder-3 V2Ender 5, Ender-5 Pro,
  • Notice: The Tempered Glass Build Plate is shipped randomly with the Creality logo and without the logo
Customer Reviews

Based on 29 reviews


Write A Review

Ask A Question

Reviews (29) Questions (0)
Brand new to 3D printing. Less than 2 months in. I was having problems with adhesion supposedly because of an improperly leveled bed. What i did that i kinda regret because it look bad but kinda dont regret cuz it’s super forgiving is sprayed the bed with Elmer’s glue. Im not sure if you are supposed to do that on this bed or not but pretty much the glue is almost permanent. I fucked up the first time because i sprayed too much of it on one spot instead of doing one or two light coats. But pretty much you lightly coat the bed with elmers glue spray and your leveling can be off. You only do it ONCE cuz it looks like the glue is permanently on there and then when the bed heats up again the glue softens and becomes sticky again. I have been watching some of the glue coming off with prints but the bed still remains sticky. It fights to keep the print. I havent used spray in a month cuz its still sticky. I love the original look of this bed snd im considering buying another one but never using any adhesive on the spare. For someone that is proficient at leveling the bed, this works well without anything on it.
At first, I could not remove the prints from the bed. Simply wait a bit that it cools down and use a spray with 50% water and 50% alcool. Then it's super easy to remove the prints from the bed ! Great product.
Mine came quite warped, being higher in the middle. works perfectly with PLA but wont hold PETG at all. you need hair spray to make it work, but i think it is not meant to use any adhesives on it. Take up to 7 minutues to reach 80°C. But even having all those issues, i really like it and recommend the use, but keep in mine the downsides always come together and sadly the manufacturers hide it from us
Rich Holst
I have been using the plate for about a week around the clock. Adhesion is good, but I usually print a skirt or a small square somewhere to ensure I get a good start. It is very sticky when the plate is still hot, so I either wait for it to cool to room temperature or I put it thin the fridge for 10 minutes. The prints all but fall off after it has cooled.
I bought this upgrade to sort out my bed adhesion, I found it to be so good I have problems getting PLA off it. it could just be me, I have only had it 2 days. and only had the printer 5 weeks. A big learning curve for me.
Georg Lang
Write a review
*Body of Review
Customer Image
Submit Review
Ask a Question
Submit Question