Home Collections Cama de vidrio templado de 235 mm * 235 mm para Ender 3 (Pro) / Ender 3 V2 / Ender 5

Cama de vidrio templado de 235 mm * 235 mm para Ender 3 (Pro) / Ender 3 V2 / Ender 5

Name: Cama de vidrio templado de 235 mm * 235 mm para Ender 3 (Pro) / Ender 3 V2 / Ender 5
Brand: Creality 3D
Price: 18.99 USD
Availability: InStock
Rating: 4.9 (29 reviews)

$ USD

29 Reviews Pricing Not Include Tax

Ship From

United StatesChinaUnited KingdomCanadaAustraliaCzech Republic

Size

235*235mm

Please select product butes before purchasing~~

Ship to

It is expected to arrive within and will cost $ USD to ship

This item can't be shipped to this Country/Region

Bundles

${ meal.bage }

${ meal.title }

${ meal.skus }

${ sku.name }：

${ skuVal }

$${ meal.price }USD

$${ meal.oldPrice }USD

Quantity

28 Available

Cama de vidrio Creality Ender Serie 3 (235 * 235 mm)

Excelente adherencia: La superficie de construcción de carbono y silicona creality art proporciona la mejor adherencia del mercado. Una vez que el semillero se enfríe de nuevo a temperatura ambiente, la base de carbono-silicona liberará el modelo que se puede quitar fácilmente a mano.
Conveniente de usar: La nueva placa de vidrio se puede colocar sobre cualquier superficie de semillero existente y mantenerse en su lugar con clips simples. Limpiar con agua. Fácil de quitar su impresión a mano o con un raspador.
Diseño personalizado: Diseñado con un pequeño logotipo de Creality en la parte inferior de vidrio templado para evitar marcas de impresión de logotipos y recordar el modelo de la plataforma de impresión.
Alto rendimiento: A medida que el semillero se calienta a temperaturas más altas, proporciona aún más adherencia. Perfecto para aquellas impresiones ABS con problemas de deformación difíciles.
Fiabilidad: El recubrimiento especial es inorgánico, con su dureza de 8 Mohs y resistencia al calor de hasta 400 °C.
Compatibilidad: Compatible con la impresora 3D Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-3 V2, Ender 5, Ender-5 Pro,
Aviso: La placa de construcción de vidrio templado se envía al azar con el logotipo de Creality y sin el logotipo

Customer Reviews

Based on 29 reviews

90%

(26)

10%

(3)

(0)

Write A Review

Ask A Question

Reviews (29) Questions (0)

Yoel

Brand new to 3D printing. Less than 2 months in. I was having problems with adhesion supposedly because of an improperly leveled bed. What i did that i kinda regret because it look bad but kinda dont regret cuz it’s super forgiving is sprayed the bed with Elmer’s glue. Im not sure if you are supposed to do that on this bed or not but pretty much the glue is almost permanent. I fucked up the first time because i sprayed too much of it on one spot instead of doing one or two light coats. But pretty much you lightly coat the bed with elmers glue spray and your leveling can be off. You only do it ONCE cuz it looks like the glue is permanently on there and then when the bed heats up again the glue softens and becomes sticky again. I have been watching some of the glue coming off with prints but the bed still remains sticky. It fights to keep the print. I havent used spray in a month cuz its still sticky. I love the original look of this bed snd im considering buying another one but never using any adhesive on the spare. For someone that is proficient at leveling the bed, this works well without anything on it.

Xavier

At first, I could not remove the prints from the bed. Simply wait a bit that it cools down and use a spray with 50% water and 50% alcool. Then it's super easy to remove the prints from the bed ! Great product.

Pastorelli

Mine came quite warped, being higher in the middle. works perfectly with PLA but wont hold PETG at all. you need hair spray to make it work, but i think it is not meant to use any adhesives on it. Take up to 7 minutues to reach 80°C. But even having all those issues, i really like it and recommend the use, but keep in mine the downsides always come together and sadly the manufacturers hide it from us

Rich Holst

I have been using the plate for about a week around the clock. Adhesion is good, but I usually print a skirt or a small square somewhere to ensure I get a good start. It is very sticky when the plate is still hot, so I either wait for it to cool to room temperature or I put it thin the fridge for 10 minutes. The prints all but fall off after it has cooled.

Deadnewbie

I bought this upgrade to sort out my bed adhesion, I found it to be so good I have problems getting PLA off it. it could just be me, I have only had it 2 days. and only had the printer 5 weeks. A big learning curve for me.

Georg Lang

perfect

$ USD

ADD TO CART BUY IT NOW