I Love these Printer, out of the Box great ABS Prints
This added so much convenience, I wish I'd found it sooner! If you're using a resin printer I would consider these a must-have.
Equipamento muito estável e sua estrutura mantém a impressora sem perder o alinhamento da mesa inicial que por sinal é bem simples de ser feito. Comprei a impressora para trabalhar com peças técnicas e acreditava que o ABS seria a melhor solução, porém, encontrei no PETg uma resistência mecânica equivalente bem como com PETg é tão fácil de trabalhar quanto o PLA. Caso necessite fazer uma campânula para manter sua impressora trabalhar com o ABS sugiro fazê-la em Policarbonato. Talvez a única e mínima observação na máquina é sua mesa aquecida que para chegar à temperatura de 95 a 100°C pode levar entre 10 a 15 minutos.
I love the CR-10 V3 !! Turns out good consistent prints one right after the other. Also has a great build volume. It's so great I have TWO. Also lots of support out there and fun to upgrade. :)
I think it's a great Resin printer in it's price range. "Maybe the best" I have been using for around 3 months with zero problems and it turns out great prints. I highly recommend it !!
The Ender 3 Max is a nice a bridge between the Ender and CR line of printers. I needed a printer with a 300x300 build volume and like the Ender series so the Max came along at perfect time for me. It's a solid, well built printer with a good feature set for the price. I added a bltouch, capricorn tubing and a compiled version of the latest Marlin bugfix 2.0. The latest version of bugfix has an Ender 3 Max config available so that saved a lot of time. I didn't try loading any of the Creality supplied firmware so I can't say how well they work. Cura 4.8 still doesn't have a Max profile but it's not hard to create a new printer or modify an existing one. Overall, I'm quite happy with the Max. I got the larger print volume I needed and was able to stay in the Ender line of printers.
Bought this printer few months back. I bought for a project. i have been using 3d printer for few years now. I used this printer for 3-4 times to testprint. it was okay not bad. but i had not used it for month and it's gone complete bonkers. the z-offset is like 20mm above the print bed, wont auto-level, nozzle wont touch printer bed. upgraded the firmware aswell, nothing. I tried to get in touch with the manufacturer, no answer. absolute shite
Love this printer. My 1st and I did a lot of research where I trumped the cr6 se over the prusa. Great printer for 1st time users and the auto bed levelling and duel z axis makes printing a dream. Love the touch sensitive controls - which is a breeze to operate ( why but a printer with a dial?)
Money well spent and it was brought direct from official creality website
it stops working after 22 month because motherboard fault. Creality want replace it.
was good until then.
I print alot of tabletop scenery and influence it on my Instagram (under the hotend). I decided to give the new hp filament a go and it's now become my go to filament it's that good if you want a Hassel free amazing quality filament then this is the 1.
I'm so happy with it! It prints so quietly, the prints are smooth and it's very easy to use. I would highly recommend
This is basically the baseplate and Y axis of the CR10 with a full sized buildplate and carbo base with the frame of the Ender 3. But it works and the price is good. I got excellent results out of box. Only hitch is that there isn't a profile in Cura or Slic3r yet and the Marlin config doesn't yet have examples. But it is basically 4.2.2 board on Ender with big frame.
On;y x and y stepper motors are TMC driven - 2208 I believe, the Extruder and Z axis are A4988, so there is a reduction in noise but not zero noise. The only thing I have slight difficulty with is the filament sensor - if you don't entirely straighten the first piece of filament it is difficult to thread through. Otherwise a good solid printer I believe with give many hours of pleasure
it worked the best for my cr10 s I have tried jayo and overture and they are really brittle so if I were you I would use creality filament
Lors de la réception, emballage intact.
Composants très bien emballés.
Qualité de finition remarquable.
Excellente imprimante 3D.
Really love this printer. It's great but needs a direct drive to print ABS better. For PLA, this is very nice, very fast, and very precise. I want to order more of this printer it's so good.