• Home
  • Collections
  • [NEW YEAR SALE]Ender-6 3Dプリンタ, Core-xy框縁

[NEW YEAR SALE]Ender-6 3Dプリンタ, Core-xy框縁

コア-XY構造の創造性エンダーシリーズ。3倍印刷速度:最大150mm/s | 250* 250* 400mm

$ 466.00 USD $ 549.00 USD Sale
5 レビュー
Ship From
  • United States
  • United Kingdom
  • Czech Republic
  • China(Ship within 1week)
Please select product attributes before purchasing~~
Model-1
  • Ender-6(With Acrylic)
  • Ender-6+BL Touch
Shipping
This item can't be shipped to this Country/Region
It is expected to arrive within3 daysand will cost£10to ship
Quantity

Ender-6 3Dプリンタ, Core-xy框縁

エレガントな外観:透明なアクリルオープンドアと青いコーナーと一致する新しい外観の統合されたオールメタルチャンバーボディ付きエンダー6。

ウルトラサイレント印刷:Ender-6は、超サイレントドイツ輸入TMCモーションコントローラでカスタムメイドされており、印刷プロセスがノイズを発生させないことを可能にします。TMC-2208マザーボードは、常に静寂の中で滑らかな動きを保証します。

大きな印刷サイズ: (250 *250*400mm)は、多くの印刷要件を満たすことができます。あなたが想像し、マシンが保持することができるすべてのもの。

安定したコア -XY構造: エンダー-6 コアXY機械構造と高品質の印刷ノズルで印刷をより安定し、より正確にする方が簡単です。

3X印刷速度: エンダー-6 150mm/sまでの印刷速度を達成するために非常にうまく機能し、より速く結果を提供する。

Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer, creality ender-6 coxey 3d printer
Ender-6 3d printer
Ender-6 Screen Firmware
DWIN_SET.zip
Ender-6 Mainboard
Ender-6-V1.0.4.9-Endstop.bin
Ender-6 with BL Touch
Ender-6-Marlin2.0.1-HW-V4.3.1-SW-V1.0.4.9-BLTouch.bin
カスタマーレビュー

に基づく5レビュー

  • 100%
  • 0%
  • 0%
  • 0%
  • 0%
レビューを書く
質問する
Dave
verified
After buying and returning several printers, I settled on the Ender 6. Bought a BLTouch afterwards, but I had so many issues, due to different vendors using different colors for the wiring. The Creality one didn't work, but found, after many hours, that I had to swap two wires. The SD card also had a short, which fried the mainboard once I attempted to use it. I never got a response from Creality, so I bought another board, and repaired the shorted out wires. With the negatives out of the way, I have to say that this printer is very well built. It uses 2040 extrusions for everything except the gantry. The belts are 9mm, good quality and don't seem too have stretched or freyed at all. The bed is cantilevered, but it uses dual extrusions, so there's really no sagging. Even though this is a fantastic printer out of the box, there are a few upgrades I would recommend if you want to get the most out of it. 1. Get the rubber bed mounts and ditch the springs. You will have to re-level the bed so much less often. 2. Change out the fans for Noctuas. They're silent, and there's a mount on thingiverse for the case fan. You can't even tell the printer's on when it's not printing. Either get 24v fans, or a step-down voltage regulator. 3. Change the hotend, if you want to be able to print ABS or other high-temp filaments. A good replacement is the BIQU H2, which is around $150. Or if you can afford it, the Mosquito Magnum is an awesome hotend. The fan is noisy in that one, because it's so small, though. 4. Install Klipper. You'll need a Raspberry Pi or similar MCU. This annoyed you to print faster and higher quality. 5. Linear rails makes a difference, but not necessary. 6. Upgrade to a BIQU Pico mainboard with an integrated Pi. Personally, I have an Octopus Pro, but I'm also adding additional features and need the extra drivers. My Printer hardly resembles an Ender 6 at this point, but I highly recommend it as a starting point.
kevin muniz
verified
Straight from the box I’ve had nothing but issues. Biggest issue I had was the sd card reader. It doesn’t read anything not a single file I put on it. I’ve emailed for help multiple times and even tried getting it replaced and suddenly everyone stopped emailing me back so I can’t get it replaced by them. Next issue is the feeder. Doesn’t even grip my material anymore and I ordered an upgraded one and not even that works either. The bl touch that you can buy for this ender doesn’t work I ran 90 tests and only had 2 work properly. I asked for a replacement aswell and suddenly stopped replying to me aswell. I have to buy a whole new feeder and bl touch I just gave up on because that was $60 I wasted and a whole month worth of time (literally) waiting for it to come in wasted. I regret buying this p.o.s. I’d be spending my money better by shredding it (the money). Because after shredding it I don’t have to buy an upgrade/replacement or email someone back just to be ignored and no longer helped.
Aurélien Thiry
verified
Lors de la réception, emballage intact. Composants très bien emballés. Qualité de finition remarquable. Excellente imprimante 3D.
HckLrd
verified
Amazing machine although I had to implement FOUR homemade upgrades covering some unexpected lacks. Additionally, after some print tests, I've tuned some gcode parameters in the slicer trying to get the best in quality and speed. UPGRADES: 1.- there is not an external usb interface out of the box for connectivity and remote management but if you open the bottom cover you can connect a microusb to the main board but be careful to remove the VCC PIN of your cable in order to avoid undesirable surprises. 2.- The structure doesn't include any light/lamp to monitor printing processes. I've taken advantage of the unused VCC output at the microusb mainboard connector (plus GND) to plug there power for a 5V black flat led lamp mounted at the top of the structure (it looks really nice, totally integrated). Wires looks invisible, going from the lamp to the bottom box through the aluminum structure (I had to design/print some small black clips fixing the cable inside the aluminum bars) 3.- Hot-end fan is too noisy so I've replaced it with one ultra silent Noctua plus one stepdown (a mini 24v to 12v converter) inside the bottom box. 4.- Filament spools rubs the transparent panel all the time so I've mounted a thin foam ring between them protecting the panel Now it looks great but there is a fourth enhancement pending: - A transparent curved top cover to preserve temperature inside will allow printing with other type of materials (Creality crew, please consider it a suggestion) TUNING TIPS: - For PLA, set temp bed to 60-65º. With lower temp PLA doesn't stick well - Increase hot-end temp when increase speed: 210 is good for 100% speed, 220º for 200% and 230º for 300% - For high speed don't select complex fill patterns in order to avoid issues. Lines and zig-zag patterns work fine.
Jeremy Folsom
verified
Really love this printer. It's great but needs a direct drive to print ABS better. For PLA, this is very nice, very fast, and very precise. I want to order more of this printer it's so good.
[NEW YEAR SALE]Ender-6 3Dプリンタ, Core-xy框縁
-
£ 239
Added to the cart