As the temperature drops, you might notice some abnormal issues during printing, such as the flying edge showed below. It is the first layer the most crucial step of the printing that has been proven to be most problematic for novices! You will find ways to fix it after reading this post.
The extrusion system means so much for 3d printers. A well-calibrated extruder shall block you from many 3d printing issues and imperfections. The just adequate extrusion amount is the goal we calibrate for. But how? Let’s figure that out in this blog.
The most common but annoying 3d printing issue we both encountered especially in our novice stage. It seems to be able to sneak in any gap in the prints and ruthlessly ruin the fun of 3d printing! But do you know where these strings come from? And how to eliminate them for good? You will find the answer to it after reading this article!
In this article, we tested the following features of Creality Sonic Pad
- Simplified Klipper operation
- Easy Connect to Ender-3 Series
- real-time monitoring and time-lapse shooting
- 10%~30% printing speed up
- Input Shaping (Resonance compensation Features)
- PID Tuning (calibrate hotbed temperature)
Thanks always & Happy Teachers' Day
Best wishes for health and happiness to all of us!
The best settings in Cura for the Ender 3 S1 depend on the intended use of the object, the filament used and other parameters. The fastest way to get a perfect ...
Creality Ender-3 S1, upgraded Ender 3 Direct Drive 3d printer with cr touch auto leveling. Easy printing with more fun. We will keep sharing you our prints on Ender-3 S1. Learn more 3d printing setting for your ender 3 s1 3d printer.