¡ Tienda oficial de Creality3D ®! EU/US/AU/UK/FR/Italia En stock + 3 a 7 días Entrega! 30-¡ Política de devolución!

Para CR-10 v2, Frimware Download -

CR-10V2

Descarga de Firmware

Código fuente

Archivos de tarjeta SD & Manual

 

-----------------------------------------------------------------------------------

Normalmente, instalará automáticamente el controlador después de conectar computadora y máquina a través de la línea USB.

Si no instala el controlador, puede hacerlo solo. <Slicer no tiene com 3 en la configuración de la máquina. > ¿Cómo instalarlo?

El conductor está en la tarjeta SD.

- Haga clic derecho en "Esta PC" desde el escritorio
- Elija “Propiedades (Gerente)” > “Gerente de dispositivos”.
- Encuentra el puerto en serie que muestra amarillo.
- Haga clic con el botón derecho en "Software de controlador actualizado" > "Examine mi computadora para el software de controlador".

Galería de video

1. Creality CR-10 V2 Unbox Build and Print!

2. CR-10 V2 Bltouch Auto Sensor de nivelación de camas Tutorial


25 comentarios

  • Louis Ballenger

    What firmware do you use for the bl touch on a cr-10 v2. I have heard that I need to use the Marlin firmware? Not sure can someone guide me. And were can I find the Marlin firmware?

  • Daniel w

    To all of you, just put tape on the pin to the right in the USB plug to cut the power. Then the lcd won’t light up. And you need to update windows drivers by pushing the windows button and go to advanced in settings→ windows update

  • Jeff Edmonds

    I can’t do anything i feel totally ripped off.
    If I plug usb a USB cable the damn cr10 control box lights up!
    this is NOT supposed to happen Power is not supposed to be mapped to this connector in the damn crtl box
    No one will help me at creality or amazon

  • Jeff Edmonds

    I can’t do anything i feel totally ripped off.
    If I plug usb a USB cable the damn cr10 control box lights up!
    this is NOT supposed to happen Power is not supposed to be mapped to this connector in the damn crtl box
    No one will help me at creality or amazon

  • Hussain Eid

    im having an issue with my CR-10 V2, it suddenly freezes in the middle of the printing process, i have tried to re print but it freezes again.
    your advise is highly appreciated

Dejar un comentario

Por favor tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados