Creality3D HALOT-ONE: CL-60 Resin 3D-Drucker

NEUE LICHTQUELLE: 20% höhere Präzision, 30% höhere Gleichmäßigkeit und höhere Sättigung. Z-Achsen-Modul; OTA Online-Upgrade; "HALOT BOX" Slicing Software

$ 159,00 USD $ 349,00 USD 2021 New
4 reviews
Ship From
  • United States
  • Czech Republic
  • United Kingdom
  • Australia
Please select product attributes before purchasing~~
Resin
  • Halot One
Shipping
This item can't be shipped to this Country/Region
It is expected to arrive within3 daysand will cost£10to ship
Quantity
0.00 0.00 2021 New

Creality Halot Serie Resin: Budget Resin 3D Drucker

HALOT Resin 3D-Drucker mit nützlichen Funktionen wie 120W Power Super Spotlight NEW Light Source Structure, Wi-Fi-Konnektivität für Ein-Klick-Firmware-Updates, Linux-Betriebssystem und Creality New Slicer usw. Und "HALOT One" ist eine Mini-Version im Vergleich zum "HALOT sky" in Druckgröße & Design.
NEUE Lichtquellenstruktur: 120W Power Super Strahler. Die selbst entwickelte integrierte Lichtquelle, Precision Light Control
High Agility Slicing, Creality New Slicing System: Eine vereinfachte Benutzeroberfläche und Easy Modeling-Funktion und unterstützt den Parameter customized
Hochstabstabliche Z-Achse für hochwertigen Druck.
WIFI-APP intelligente Steuerung. Unterstützt Creality Cloud.
OTA-Online-Upgrade: Neue Firmware/neues System. Upgrade mit einem Klick. Bessere Erfahrung beim Firmware-Upgrade
Smart Operation System -Linux: 64-Bit-4-Core-CPU + GPU-Mainboard unterstützt den schnelleren Betrieb und verbessert die Druckeffizienz erheblich.
Großartige Betriebserfahrung: Linux-System Für ein besseres KI-Erlebnis sorgen ein 5-Zoll-High-Definition-Touchscreen für einfache Arbeiten.

halot one cl 60 3d printer

Häufig gestellte Fragen:

Q: Wie aktualisiere ich die Firmware Creality Halot-One?

A:Upgrade über USB-Kabel, Videoanleitung:: https://www.youtube.com/embed/lMORkzUBB8Q
Upgrade über Wifi (OTA Upgraded), Videoanleitung:: https://www.youtube.com/embed/uymYOSwZGq4

Q: warum kleben meine Drucke nicht auf dem Bett?

A: 1. Bitte überprüfen Sie den Bettstand des Harzdruckers. Die Bettebene wird parallel zu Ihrem LCD-Bildschirm benötigt, sonst klebt sie überhaupt nicht. Überprüfen Sie ihren Versatzabstand zwischen Ihrem LCD-Bildschirm und der Bauplatte, ob zu viel Abstand zwischen dem LCD besteht.Bed leveling guide: https://www.youtube.com/watch?v=yF7F0hPa1EY
2.Ob Sie Ihre Harzbehälter gereinigt haben und es immer noch Stücke von ausgehärtetem Harz gibt, die immer noch an den unteren Stellen bleiben. Wenn nicht ein Bettnächungsproblem. Sie müssen überprüfen, ob die Belichtungszeit der Basisebene, die Sie auf die ersten sechs bis acht Ebenen jedes von Ihnen ausgeführten Drucks anwenden, angewendet wird. und richten Sie IhreEinstellungen für die untere Belichtung.
3. Etwas Harz kann sehr schnell wie das schnellere haften (mit 45-50 Sekunden Belichtungszeit). Wenn Sie eine andere Art von Harz / harz einer anderen Marke verwenden. Es wird empfohlen, dass Sie die Einstellung der Basisebene und die Belichtungszeiten der Ebene auf deren Liste auflisten.
4. Das FEP-Blatt ist zu locker. Bitte überprüfen Sie, ob Ihre FTP-Spannung vor dem Durcheinander mit Ihrer erhöhten Höhe (während des Schälvorgangs) oder ob sie eine neue ersetzen muss.

Q: What slicer software can be used for Halot resin? Can I use the Chitubox Slicer?

A: Halot Series 3D Printer unterstützt jetzt nur Halot Box und Lychee Slicer. Halot Series Resin Printer konfiguriert mit unserem Halot Box Slicer (Creality Selbstentwicklungssoftware) und wird ständig verbessert und für unseren Benutzer freigegeben. Und Sie können auch den Lychee Slicer verwenden, jetzt ist er kompatibel. (Unterstützung Halot Serie: Halot one, Halot Sky, Halot Max)

HALOT Slicer Box/Manual
for MAC users、 for win64 computer
Halot One Firmware
Latest firmware updates by connecting computer with USB cable
Customer Reviews

Based on4reviews

  • 100%
  • 0%
  • 0%
  • 0%
  • 0%
Write A Review
Ask A Question
Alex Wilbur
verified
The Halot-One is the first resin printer I purchased, so my experience is limited. I can say it worked out of the box. The initial plate leveling took less than five minutes and then I was off and printing. I have been using the Halot-One everyday for three months now and it has been flawless. I have had to replace a couple FEP vat films, so I have just figured that they are a standard consumable when using a resin printer. I have found it important to level the build plate occasionally. I always level between resin changes, and have no issues with adhesion. As a side note, I have found a couple gallons of iso alcohol, a good supply of rags and paper towels and a dedicated workspace helpful. Disposable gloves, respirator, eye protection and adequate ventilation necessary.
James McKenzie
verified
I reviewed the printer in-depth for my YouTube channel, and was thoroughly pleased with the results. I performed several prints, one of which I'm showing. Wifi connectivity was easy to establish with my home network, and I was able to update the firmware easily through the in-built wifi system. When it came to slicing, the included slicing software was faulty, however, a newer version was already out and I was able to update to that, and it provided the following print with the default settings. The unit is excellent and will likely become my main resin printer up until such time as I can finally get my hands on one of the larger resin printers.
Facebook user
verified
Hey everyone! I finally got a chance to take a break from packing for the move to try out the Creality Halot One resin printer. If I’m being honest, I definitely could’ve done some research before I really got into it, but with our move happening in less than two weeks it’s crunch time for me. I definitely just went full “send it” and obviously hit some snags. Resin printers aren’t nearly as forgiving as FDM, but the quality is outstanding! I fully expect to get lambasted by the all-knowing resin gurus who, I can only imagine, are drooling over my mistakes. But hey, I deserve it, I just went for it. Here are a few thoughts I had after running a few prints through it: General Thoughts: - The small form factor and translucent red cover are a very sexy look that comes together for a small footprint that should sit nicely on any desk. - I wish I would’ve known that it does not come with any sample resin, contrasting FDM printers that typically come with at least enough filament to make a small model. - The UI is nice and clean on the crisp high-definition screen. It’s easy to navigate, but if you’re used to FDM printers you’ll probably need to recalibrate your brain for the different options specific to FDM printers. - I was not at all prepared for resin printing, but that’s on me. I did not have a proper wash and/or cure station nor did I have rubber gloves or a generally good place to work with resin. Don’t do what I did, do some research and prepare yourself. - I had no idea how much resin I needed and what was “normal”. Is it normal for the resin to go above the print area of the print surface? How much resin should I be using for a print? Do I need to wipe anything down ahead of time? How do I properly clean my printer when I’m done? Do I need to prep anything so the prints come off easily when they’re done? I’m sure the information is out there, it just wasn’t readily apparent in what I had available to me. The Good: - The ease of use, in terms of general set up, was far simpler than any FDM printer I’ve used. I got it out of the box, mounted the printing plate, did a quick level of the bed, and that was that. - The small form factor makes it easy to put just about anywhere, but beware… (see The Bad). - Let’s talk about print detail quality. Holy moly, I’ve heard about resin quality prints and the level of detail, but I’ve never seen one in person. The three skulls in this image are about an inch in total. It printer in just under two hours and came out looking very nice. Without a doubt, this machine prints highly detailed models that I couldn’t ever achieve from my FDM printers. The Bad: - For me, the bad is all about the resin. In my humble opinion, it’s awful. The smell, even the low order resin, is stomach turning. Let me just say that I’m an idiot and I recognize that, but I’m definitely the guy who said, “Oh come on, it can’t be that bad to be around”. As I said, I’m an idiot and it’s really bad to be around. On my first print, the printer was about 15 feet away from me in my basement and within 20 minutes I felt nauseous. I had to go outside in the fresh air and just move my laptop outside to work until it was done. My advice to you is either properly vent this or use it in a completely different room than where you or any breathing being is at. Not trying to be dramatic, but I checked out of work an hour early because I couldn’t stomach it anymore and had to go lie down. Just please remember that all this information was already out there, I just decided to ignore it and that’s on no one else from me. My experience is not the fault of Creality or anyone else. Just me. - Resin models can be fragile. It seems to be dependent on the resin you use, but I would opt for a PETG print for something that needs to be strong and resin prints for things that just need to look good. - Resin is messy. Be prepared with rubber gloves, paper towels, and isopropyl alcohol. I’d recommend a wash and cure station to make your life a lot easier. —————————————— Overall, I’m excited to learn more about resin printing and how to best use this machine to make some super quality prints. But for now, it’s time to pack it up and get it ready to use again at the end of the month. I hope my experience helps! If you’d like to see my unboxing experience and see how much of an idiot I am, I encourage you to check out my unboxing video: https://youtu.be/PIwv0lisU8M Facebook: https://www.facebook.com/groups/creality3dofficialstore/permalink/229144579120954
Bobby
verified
Les pièces sortent avec une précision incroyable et la prise en main est ultra simple le calibrage se fait en 2min par rapport a une imprimante filament classique Fournis avec la petite raclette pour décoller les pièces c’est bien pratique En plus avec le filtre l’odeur de la résine est masqué c’est parfait
Bob Cunard2022-04-18 10:58:37 VERIFIED
Question: My Halot One is stuck on the opening splash screen. Is there something I can do to reset it?

Answer: Hi, if you don't mind, please send us more detail to sale@creality3dofficial.com. we could check and help better.

Creality3D HALOT-ONE: CL-60 Resin 3D-Drucker
-
£ 239
Added to the cart