Creality CR-10 V2 3D Printer

$ 425.00 USD
16 reviews
Ship From
  • China
Please select product attributes before purchasing~~
Model-2
  • CR-10 V2
Shipping
This item can't be shipped to this Country/Region
It is expected to arrive within3 daysand will cost£10to ship
Quantity

NEW updated Creality CR-10 V2 3D Printer

  • Upgrade V2.5 Silent motherboard: Ultra Quiet TMC2208 Motherboard, Enjoy a quiet printing environment. Now you can pay more attention to design and works, no more noise can disturb you.
  • Dual High-Quality Cooling fan: Superior cooling performance Creality 3D New design fans combine efficient, low-noise airflow, The custom-molded blades are designed for high-volume air delivery with less noise and turbulence than last generation fans.
  • Filament Monitor: The CR-10 V2 comes with a convenient monitor that will detect when the printer has run out of filament, automatically pausing the print, and will alert the user to restock the filament before continuing. Say goodbye to wasted filament and time.
  • Upgraded all-metal Extruding Unit: The upgraded grey metal extruder can support longer hours working time, Long life, and high quality.
  • Resume Print: The new upgraded control board enables the capacity to resumes printing after changing filament, power outage, or any other unexpected stoppage.
  • Brand Power Supply: Upgraded 350W MeanWell Power supports continuous 200 printing hours. More stable and safe.
  • Easy-Assembly Operation: CR-10 V2 stands out as an excellent choice for the beginning hobbyist. You can have the joy of a printer in a one-step assembly and three-step connection.
  • DIY Fun: Inspire your imagination and innovation, allow you to print high precision models, create your own world.

CR-10 V2 Unboxing and Build

Creality CR-10 V2 HD 3D PrinterCreality CR-10 V2 HD 3D PrinterCreality CR-10 V2 HD 3D PrinterCreality CR-10 V2 HD 3D PrinterCreality3D CR-10 V2 HD photos04Creality CR-10 V2 HD 3D PrinterCreality CR-10 V2 HD 3D PrinterCreality CR-10 V2 HD 3D PrinterCreality CR-10 V2 HD 3D PrinterCreality CR-10 V2 HD 3D PrinterCreality CR-10 V2 HD 3D Printer
Firmware/Manual/Open source
Included Bl touch firmware. E3d direct firmware update and installation
Customer Reviews

Based on16reviews

  • 81%
  • 6%
  • 13%
  • 0%
  • 0%
Write A Review
Ask A Question
Jonathan
verified
This was my introduction to 3d printing. I just followed instructions and watched several YouTube videos, and I was getting some really high quality prints in no time. I have since added a BLTouch and a Titan direct drive, both of which work well. I highly recommend this as an excellent starter model for someone looking to print larger objects. My only negative is the plastic cover on the hot end. Please change that to metal! Anyway, great printer for the price. My fleet of Star Wars ships agree. :)
Graham
verified
I have had a few 3D printers from different manufactures and all have given me hours of entertainment as I have had to search the Internet forums for help in getting them built, set up correctly and advice on what went wrong with my many failed prints. So last November I bought a Creality CR-10 V2 in the Sale (a really great deal) and it's been in the box until now. Like millions in the UK I find myself confined to my house and I have watched everything on Netflix so I decided to un-box and set up the CR-10 V2 assured of many hours of fiddling around and searching for the answers to problems on the Internet and hours spent trying to contact customer support for missing parts and trying to decipher badly translated manuals ... hours of fun. i was confident that this was going to use up weeks of time and I wouldn't get bored at all. So I have to report that I am disappointed ... It took me 30 mins to build the 3D printer, not even a missing screw, and the concise manual with pictures made perfect sense. I kept looking in the empty box as surely I had missed something vital but no, all was as it should be. I powered it up, no error messages. I threaded the filament which got snagged because I hadn't realised it needed to be straight, took a minute to figure that out. I levelled the Bed, that admittedly took me two goes. Then I inserted the supplied SD card and selected PLA, to which the extruder and bed heated up very quickly. Then I selected the Lucky Cat to print from the SD card with the supplied white PLA ... and the printer started to print .... flawlessly ! The quality of the cute little cat is amazing. Now I have to find something else to do to fill up the many weeks in isolation ahead, well I guess I will just get on and print a load of stuff. Thanks Creality. But wait, I also have the BLTouch bed levelling device to install and a Titan direct extruder, I am sure these will not work and I will have days of fun fixing them ... I will post a review shortly, hopefully it will not be boring.
The Man
verified
I just purchased this printer but I haven't received it. I ordered it on Wednesday but the order is still showing as "Unfulfilled". I highly agree with Tinkerbot over there. It's not a good business practice to make claims that a product has this or that and compare it to other products that are exactly the same when the product isn't actually capable of coming with a certain feature that has been used in advertisements. . The fact that the upgrade is not supplied with the standard version of the product is made somewhat clear by the statement in parentheses, however, up until a customer reads that part, it's made to sound like it is a standard feature. If these features are so great and they are trying to sell them with the machine, then why not equip the machine with the parts as advertised and charge the difference. It's a little beyond a marketing tactic. It could nearly be called a marketing scam.
Gabriel Stivale
verified
My overall experience with this printer has been incredible. This is my first printer, and though I am a beginner, this printer has made it very easy to get into 3D printing, and I have enjoyed my results using it. I have run into problems every once in a while (like clogs, bed leveling issues etc.), however these were all things I could fix myself and were not much of a problem. I would definitely recommend this printer, as it has been great to use.
Manan Bhatt
verified
I reviewed and spent lot of time debating & researching about which 3D printer should I go for especially these days since there are many out there. After a lot of efforts, I ended up getting CR-10 V2. I am glad I made this decision. Its truly a great, easy to use, fun 3D printer which is big enough to take on some big prints. Myself being a new bee, I wasn't sure if I should get something big like this or Ender3 or something. But I did purchase this anyway. It works great. Very silent Stepper motors, however control box fan sounds little loud but that can be modified to replace high quality silent cooling/exhaust fan. Overall I have tried only 3 prints so far but I can tell, once the leveling is done perfectly, this printer doesn't seem to need more attention. It just keep rolling, Did my third print so far and looks great. No surprises. I would recommend this printer to any one! Hands Down for Creality3D for creating such an amazing, convenient 3D printer! Check out my Videos for glimpse of the Printing process!
Tinkerbot
verified
So far my printer has been fantastic, however I'm disappoint by the way the direct drive was advertised. Almost 3 months in and no way to currently install a direct drive to the printer
shawn2022-01-12 14:35:58 VERIFIED
Question: I need the stock extruder plate you know the thing with the wheels on it mine is bent and i cant find one anywhere can you hook me up please thanks

Answer: May i know your order number or purchased link? You could send us more detail(pics) to us to get a replaced part if in warranty. Email: info@creality.com Purchase reach us: sale@creality3dofficial.com

Creality CR-10 V2 3D Printer
-
£ 239
Added to the cart