Filaments used for 3D printing come in different textures(materials), not only in different colors, but also in different printing properties.
The Ender-3S1 Series, upgraded on the Original Ender-3 to direct extrusion. and the Ender 3 S1 Pro* is the improved version of the Ender 3 S1
In this article, we have compiled the basic printing setting of different pla of Ender-3S1 Series.
To create a good Cura profile for the Ender 3 S1 Pro, a standard profile can be used as a basis. The settings must then be optimized and calibrated. In Creality Slicer there is also a good standard profile that can be used as a basis for optimizations.
| Ender-3S1 Pro (Nozzle Temp Support UP TO 300°C) | |
| PLA | Printing temperature: 190-200 °C Print bed temperature: 60 °C Printing speed: 40-60 mm/s Retraction: 0.8-1.0 mm at 50 mm/s Cooling: 100% First layer: 0% cooling, 100% extrusion width, 100% layer height |
| ABS | Printing temperature: 220-250 °C Print bed temperature: 90-100 °C Printing speed: 40-60 mm/s Retraction: 0.8-1.0 mm at 60 mm/s Cooling: 0% + Enclosure First layer: 0% cooling, 100% extrusion width, 100% layer height |
| TPU | Printing temperature: 215-230 °C Print bed temperature: 55-60 °C Printing speed: 30-40 mm/s Retraction: 1.0-1.2 mm at 60 mm/s Cooling: 100% First layer: 0% cooling, 150% extrusion width, 150% layer height |
| PETG |
Printing temperature: 220-245 °C |
Ender-3S1, Ender-3S1 PLUS
| Ender-3S1 / Ender-3S1 PLUS | |
| PLA | Nozzle temperature: 210 °C Bed temperature: 60 °C Layer height: 0.2 mm Print speed: 60 mm/s First-layer speed: 20 mm/s Travel speed: 110 mm/s Retraction: 0.8 mm at 45 mm/s Build plate adhesion: Brim Brim width: 4 mm |
| ABS | Nozzle temperature: 235 °C Bed temperature: 105 °C Layer height: 0.2 mm Print speed: 40-60 mm/s First-layer speed: 20 mm/s Travel speed: 110 mm/s Retraction: 0.8 mm at 45 mm/s Build plate adhesion: Brim Brim width: 4 mm |
| PETG | Nozzle temperature: 240 °C Bed temperature: 70 °C Layer height: 0.2 mm Print speed: 40-60 mm/s First-layer speed: 20 mm/s Travel speed: 110 mm/s Retraction: 0.9 mm at 40 mm/s Build plate adhesion: Brim Brim width: 4 mm |
Source by:
https://the3dprinterbee.com/ender-3-s1-pro-cura/
https://the3dprinterbee.com/ender-3-s1-cura-settings-profile/
.png)
