Have you got your own Ender-3 S1? We will keep sharing you our prints on Ender-3 S1 in here (STL LINK ATTACHED).
All printed with Creality PLA Filament
Easy Printing and makeup for beginners
All files are downloaded at Cults3d.
1. The ball rolls UPHILL! 3D Printed Interactive Optical Illusion;
You can 3D print this yourself by downloading the STL files at: https://cults3d.com/en/3d-model/art/impossible-up-slide-interactive-optical-illusion
(Source: STRUCKDUCK - Cults3D)
2. JUMPING KANGAROO
You can 3d print this yourself by downloading the STL Files at: https://cults3d.com/en/3d-model/game/canguro-saltarin
3D PRINTING SETTINGS
The first layer should come out perfect. Without supports.
Wall 1.2 or more;
Filling 30% or more;
The figure must be robust as it suffers many impacts. Position the flat part sticking to the bed.
3. SAMURAI CHEEMS
You can 3d print this yourself by downloading the STL Files at: https://cults3d.com/en/3d-model/game/samurai-cheems
4. ARTICULATED AXOLOTL - By MARCKR
You can 3d print this yourself by downloading the STL Files at: https://cults3d.com/en/3d-model/art/articulated-axolotl-marckr
3D Model size: X 174 × Y 70.6 × Z 28.3 mm
3D PRINTING SETTINGS compatible with PLA :)
Layer height 0.2-0.3;
5. ENDER 3 S1 FILAMENT SWIVELGUIDE
You can 3d print this yourself by downloading the STL Files at: https://cults3d.com/en/3d-model/tool/ender-3-s1-filament-swivelguide
3D Printing Setting: Print with support, 'everywhere' chosen
3D model size: X 0.018 × Y 0.0452 × Z 0.0275 mm
(Source: DARKBURROW - Cults3D)
Welcome to share us your prints on Ender 3 S1 on Facebook or Tiktok@creality3dofficial.com Do hesitate to let us know if you have met any problem during printing.