Creality3D® Official Store! EU/US/AU/UK/CA 3D Printer In stock! Order help please reach out us at sale@creality3dofficial.com

For CR-10 v2, Frimware Download -

CR-10V2

Firmware Download

Source Code

SD Card Files & Manual

 

-----------------------------------------------------------------------------------

Normally, it will automatically install the driver after connecting computer and machine through USB line.

If it does not install driver,you can do it by yourself. <Slicer does not have com 3 in machine settings.>  How to Install it? 

Driver is in the SD card. 

- Right-click “This PC” from the desktop
- Choose “Properties(Manager)”>> “Device manager”.
- Find the serial port that shows yellow.
- Right-click choose “Update driver software”>> “Browse my computer for driver software”.

Video Gallery

1. Creality CR-10 V2 Unbox Build And Print!

2. CR-10 V2 Bltouch Auto Bed Leveling Sensor Installation Tutorial


25 comments

  • Terry Cooper

    If you cannot see COM 3, open device manager (for Windows only) click on Ports….. you will probably see COM4.
    Use COM 4 not COM 3, right click on Port & scroll to properties, select bits-per-second & set to 115200.
    Close all tabs, go back to slicer, go to Machine,machine settings, change communication settings from Auto to COM 4 & set speed to 115200

  • Gabriel

    Same problem here. When I usb connect the cr10 v2 on a PC (win 7) or a Mac, the printer is not recognized in Cura nor Creality Slicer, tried to manually update the USB serial driver, but the drivers provided in the SD card are not accepted. Please give a solution to make USB working or a way to make a firmware update without USB connexion.

  • Joe Bloughie

    I have Bl Touch install no problem. You guys make sure you install the usb driver files so you can see the coms

  • Jim

    i cannot install bl touch on my cr 10 v2. i followed all instructions, slicer does not have com 3 in machine settings all i have is auto. i downloaded all firmware from your website and still no luck. please help me i want the bl touch but i cannot figure out the firmware installation process I have the same issue as Joseph

  • Joseph hounarmand

    i cannot install bl touch on my cr 10 v2. i followed all instructions, slicer does not have com 3 in machine settings all i have is auto. i downloaded all firmware from your website and still no luck. please help me i want the bl touch but i cannot figure out the firmware installation process

Leave a comment