Creality Build Plates Set: PEI Plate+Tempered Glass
$ USD
$ USD
Please select product butes before purchasing~~
How to choose the suitable 3D Printer Build Plate?
Carborundum Glass is one of the most popular building surfaces because it’s simple. A glass sheet is an easy solution for most printers. It’s stiff and flat, so it won’t warp over time.
Creality Ender 3 Series Glass→ Learn More
Cmagnet Plate is a unique system that allows you to snap your prints off the bed just by flexing the bed. The composite magnetic material of strong and non-degaussing magnetic forces of the magnetic sticker, easy to be installed and removed.
Creality Ender 3 Series Cmagnet Plates→ Learn More
PEI has excellent mechanical properties, radiation resistance, high and low-temperature resistance, high-temperature stability, and high wear resistance as well as good flame retardancy, chemical resistance, and electrical insulation characteristics.
 |
 |
 |
 |
|
| Smooth PEI Build Plate | PC Spring Steel Magnetic | Removable Magnetic Build Surface | Carborundum Glass | |
| Standard configuration of the printer | None | Ender-3S1/Ender-3V2NEO, Ender-3S1 Plus | Ender-3 Pro | Ender-3V2, Ender-5PLUS, Ender-3Neo, Ender-3Max (Neo), CR-10Smart etc,. |
| Max-temperature | Recommended 80°C (Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C) |
Recommended 80°C (Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C) |
Recommended 80°C. (Support printing at 100°C; it is generally recommended to keep it at or below 80°C, and it will lose its magnetism if it is used for a long-time above 80°C) |
Max_400℃（Normally Printing Setting is around 110℃） |
| Build Surface | PEI stick film | PC Coating | PC Coating | Tempered Glass Composite Coating |
| The effect of the bottom surface of the model | Flat and Smooth | slightly rough texture | slightly rough texture | Flat and Smooth |
| Bed Adhesion | Great for PLA, TPU, WOOD, PLA-Wood, PETG etc,. | Great for PLA, TPU, WOOD, PLA-Wood, PETG, ABS, PC, ASA etc, high temperature consumables | Great for PLA, TPU, WOOD, PLA-Wood, PETG etc,. | Flat and Smooth |
| How to remove the model | Remove the model after cooling. For high temperature printing, it is recommended to cool down slightly before taking the model. |
As the PC Spring Steel has a strong viscosity, ①For printing the high-temperature consumables need to cool down 【slightly to not be hot 】 or wear anti-scalding gloves to remove the model. To prevent the sticker fro being torn off after the model removed in the cools down in some cases. ②For printing smaller models or models with a very low height, it is recommended to add brim when printing to facilitate removal of the model |
Remove the model after cooling. For high temperature printing, it is recommended to cool down slightly before taking the model. |
Remove the model after cooling. For high temperature printing, it is recommended to cool down slightly before taking the model. |
Based on 0 reviews
Write A Review
Ask A Question
