Imprimante 3D CR-10 V3 - Imprimante 3D d'extrudeuse à entraînement direct E3D | Montage et fonctionnement du CR-10 V3 | À propos de l'imprimante 3D CR-10 V3 | Avis des clients
|Micrologiciel d'origine CR-10 V3 + micrologiciel BL Touch||Télécharger|
Imprimante 3D CR-10 V3 - Imprimante 3D d'extrudeuse à entraînement direct E3D
- Extrudeuse Direct Titan: L'extrudeuse directe est juste au-dessus de l'extrémité chaude avec peu d'espace entre les deux, ce qui permet à l'extrudeuse de pousser le filament directement dans la buse. Comme il minimise la distance entre le filament et l'extrémité chaude, l'extrudeuse directe est plus utile et plus fiable lors de la production d'impressions 3D avec des filaments souples flexibles comme le TPU et l'ABS. En outre, le plus grand avantage de l'utilisation de l'extrudeuse directe est une rétraction plus facile du filament, évitant ainsi le filament et le suintement pendant l'impression.
- Capteur de filament
-Carte mère silencieuse amélioréeIl est livré avec le lecteur ultra-muet TMC2208, offrant des performances stables et réduisant le bruit.
-Alimentation 24V / 350W Mean Well améliorée, capacité de fourniture stable et impression d'entreprise.
Montage et fonctionnement du CR-10 V3
À propos de l'examen de l'imprimante 3D CR-10 V3
I love the CR-10 V3 !! Turns out good consistent prints one right after the other. Also has a great build volume. It's so great I have TWO. Also lots of support out there and fun to upgrade. :)
best printer i ever bought the quality is best and very silent except the motherboard fan the customer service was very helpful shipping was fast overall best purchase i had thank you very much creality!
Overall it's a great machine so far but I'll be putting it through it's passes when I start using it for my client work. This was a pretty easy machine to assembly overall. The instructions were really clear and I appreciate that they provide you with the motherboard schematics and troubleshooting tree. I'll be working on a full review at a latter date but first impressions are very good so far. For the stuff that I work on a 0.8 nozzle is better so that was the first change that I made to the machine. I would like to have access to a GitHub repository for the firmware so that if I change the Thermister I can compile it myself. Although I did an unboxing video I have to say the instructions on their website is very good overall and this was one of the easier machines I’ve worked with.
It took me a couple hours to put the v3 together - I'm graduating from an Ender3 - so I'm quite pleased with the increase in area that I can now print. The v3 is considerably quieter than the Ender 3. I'm quite pleased with the entire experience. The video showing assembly helped greatly!
What I'm looking for is something similar for addition of the BL-Touch which is an upgrade I'm extremely interested in. I've seen the video for the v2. Where can I get the FW that supports BL-Touch? Where do I connect the BL-Touch to the assembly? A video similar to the v2 would help greatly.
Received the printer in just a week after the order. Incredibly simple to assemble. The printer came with all the tools needed as well as very simple instructions. I took my time checking all the pre assembled components making sure all the hardware was tight so it took me a little longer. Didn't find a single nut or bolt that wasn't torqued properly so I feel good about that.
For people in the US, make sure you flip the little switch on the control box to 115v before you try to turn it on!
The software that comes with it is easy to use, however I chose not to use it and downloaded the latest version of Ultimaker Cura. There isnt a V3 printer on there, however the V3 is just a V2 with direct drive standard so just use the V2 printer and it works perfectly.
The bed is warped which was to be expected based off all the reviews I've seen online. Its good enough for small prints in one area but I dont think it would work well if you used the entire bed. You'll either need to replace the bed with something better or install a BLTouch with is 100% worth the money and something I think Creality needs to add as a standard item on their printers.
As for printing, it works exactly as expected, actually, it's better than expected. Im unbelievably pleased with the results and would HIGHLY recommend this printer to newcomers and veterans alike. I cant see anyone being unhappy with this investment.