Creality3D HALOT-ONE: Imprimante 3D résine CL-60
$ USD
$ USD
Ship From
Resin
Please select product attributes before purchasing~~
Ship to
It is expected to arrive within and will cost
$
USD to ship
This item can't be shipped to this Country/Region
Bundles
${ meal.bage }
${ meal.title }
${ meal.skus }
${ sku.name }:
${ skuVal }
$${
meal.price }USD
$${
meal.oldPrice }USD
Quantity
28 Available
Add To Cart
Buy It Now
People who bought this item also bought
Résine Creality Halot Series : Résine Budget Halot One
Imprimante 3D HALOT Resin dotée de fonctionnalités utiles telles que 120W Power Super spotlight NEW Light Source Structure, connectivité Wi-Fi permettant des mises à jour du firmware en un clic, système d’exploitation Linux et Creality New Slicer, etc. Et « HALOT One » est une version mini par rapport au « HALOT sky » en taille d’impression et design.NOUVELLE structure de source lumineuse: 120W Power Super projecteur. La source lumineuse intégrale auto-développée, Precision light control
Découpage haute agilité, nouveau système de découpage Creality : une interface utilisateur simplifiée et une fonction de modélisation facile, et prend en charge le paramètre personnalisé
Axe Z haute stabilité pour une impression de haute qualité.
Contrôle intelligent WIFI-APP. Prend en charge Creality Cloud.
Mise à niveau en ligne OTA : Nouveau firmware/nouveau système. mise à niveau en un clic. Obtenez une meilleure expérience dans la mise à niveau du micrologiciel
Smart Operation System -Linux: La carte mère CPU + GPU 64 bits à 4 cœurs prend en charge le fonctionnement plus rapide et améliore considérablement l’efficacité de l’impression.
Grande expérience de fonctionnement: Système Linux Pour une meilleure expérience d’IA, un écran tactile coloré haute définition de 5 pouces permet de travailler facilement.
Customer Reviews
Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Write A Review
Ask A Question
Alex Wilbur
The Halot-One is the first resin printer I purchased, so my experience is limited. I can say it worked out of the box. The initial plate leveling took less than five minutes and then I was off and printing. I have been using the Halot-One everyday for three months now and it has been flawless. I have had to replace a couple FEP vat films, so I have just figured that they are a standard consumable when using a resin printer. I have found it important to level the build plate occasionally. I always level between resin changes, and have no issues with adhesion. As a side note, I have found a couple gallons of iso alcohol, a good supply of rags and paper towels and a dedicated workspace helpful. Disposable gloves, respirator, eye protection and adequate ventilation necessary.
James McKenzie
I reviewed the printer in-depth for my YouTube channel, and was thoroughly pleased with the results. I performed several prints, one of which I'm showing. Wifi connectivity was easy to establish with my home network, and I was able to update the firmware easily through the in-built wifi system. When it came to slicing, the included slicing software was faulty, however, a newer version was already out and I was able to update to that, and it provided the following print with the default settings. The unit is excellent and will likely become my main resin printer up until such time as I can finally get my hands on one of the larger resin printers.
Facebook user
Hey everyone! I finally got a chance to take a break from packing for the move to try out the Creality Halot One resin printer. If I’m being honest, I definitely could’ve done some research before I really got into it, but with our move happening in less than two weeks it’s crunch time for me. I definitely just went full “send it” and obviously hit some snags. Resin printers aren’t nearly as forgiving as FDM, but the quality is outstanding!
I fully expect to get lambasted by the all-knowing resin gurus who, I can only imagine, are drooling over my mistakes. But hey, I deserve it, I just went for it. Here are a few thoughts I had after running a few prints through it:
General Thoughts:
- The small form factor and translucent red cover are a very sexy look that comes together for a small footprint that should sit nicely on any desk.
- I wish I would’ve known that it does not come with any sample resin, contrasting FDM printers that typically come with at least enough filament to make a small model.
- The UI is nice and clean on the crisp high-definition screen. It’s easy to navigate, but if you’re used to FDM printers you’ll probably need to recalibrate your brain for the different options specific to FDM printers.
- I was not at all prepared for resin printing, but that’s on me. I did not have a proper wash and/or cure station nor did I have rubber gloves or a generally good place to work with resin. Don’t do what I did, do some research and prepare yourself.
- I had no idea how much resin I needed and what was “normal”. Is it normal for the resin to go above the print area of the print surface? How much resin should I be using for a print? Do I need to wipe anything down ahead of time? How do I properly clean my printer when I’m done? Do I need to prep anything so the prints come off easily when they’re done? I’m sure the information is out there, it just wasn’t readily apparent in what I had available to me.
The Good:
- The ease of use, in terms of general set up, was far simpler than any FDM printer I’ve used. I got it out of the box, mounted the printing plate, did a quick level of the bed, and that was that.
- The small form factor makes it easy to put just about anywhere, but beware… (see The Bad).
- Let’s talk about print detail quality. Holy moly, I’ve heard about resin quality prints and the level of detail, but I’ve never seen one in person. The three skulls in this image are about an inch in total. It printer in just under two hours and came out looking very nice. Without a doubt, this machine prints highly detailed models that I couldn’t ever achieve from my FDM printers.
The Bad:
- For me, the bad is all about the resin. In my humble opinion, it’s awful. The smell, even the low order resin, is stomach turning. Let me just say that I’m an idiot and I recognize that, but I’m definitely the guy who said, “Oh come on, it can’t be that bad to be around”. As I said, I’m an idiot and it’s really bad to be around.
On my first print, the printer was about 15 feet away from me in my basement and within 20 minutes I felt nauseous. I had to go outside in the fresh air and just move my laptop outside to work until it was done. My advice to you is either properly vent this or use it in a completely different room than where you or any breathing being is at. Not trying to be dramatic, but I checked out of work an hour early because I couldn’t stomach it anymore and had to go lie down.
Just please remember that all this information was already out there, I just decided to ignore it and that’s on no one else from me. My experience is not the fault of Creality or anyone else. Just me.
- Resin models can be fragile. It seems to be dependent on the resin you use, but I would opt for a PETG print for something that needs to be strong and resin prints for things that just need to look good.
- Resin is messy. Be prepared with rubber gloves, paper towels, and isopropyl alcohol. I’d recommend a wash and cure station to make your life a lot easier.
——————————————
Overall, I’m excited to learn more about resin printing and how to best use this machine to make some super quality prints. But for now, it’s time to pack it up and get it ready to use again at the end of the month. I hope my experience helps!
If you’d like to see my unboxing experience and see how much of an idiot I am, I encourage you to check out my unboxing video: https://youtu.be/PIwv0lisU8M
Facebook: https://www.facebook.com/groups/creality3dofficialstore/permalink/229144579120954
Bobby
Les pièces sortent avec une précision incroyable et la prise en main est ultra simple le calibrage se fait en 2min par rapport a une imprimante filament classique
Fournis avec la petite raclette pour décoller les pièces c’est bien pratique
En plus avec le filtre l’odeur de la résine est masqué c’est parfait
Bob Cunard
Q
My Halot One is stuck on the opening splash screen. Is there something I can do to reset it?
A
Hi, if you don't mind, please send us more detail to sale@creality3dofficial.com. we could check and help better.
$
USD
$
USD
ADD TO CART
BUY IT NOW
Write a review
*Name
*Email
*Body of Review
*Rating
Customer Image
Submit Review
Ask a Question
*Name
*Email
*Question
Submit Question