• Home
  • Collections
  • Creality CR-30: Der 3DPrintMill, Infinite-Z, Belt 3D-Drucker

Creality CR-30: Der 3DPrintMill, Infinite-Z, Belt 3D-Drucker

Ein 3D-Drucker mit Volumen von Infinite-Z, der von Naomi Wu & Creality3D entwickelt wurde. Druckmaß: 200* 170* mm | Stabile CoreXY-Struktur | Filamentsensor.

$ 891,65 USD $ 1049,00 USD Final $892 | Code: CR30
7 reviews
Ship From
  • United States
  • Czech Republic
  • United Kingdom
  • Canada
  • China
  • Australia
Please select product attributes before purchasing~~
Model-2
  • CR 30(3DPrintmill)
  • CR 30(3DPrintmill) + 10KG PLA
Shipping
This item can't be shipped to this Country/Region
It is expected to arrive within3 daysand will cost£10to ship
Quantity
0.00 0.00 Final $892 | Code: CR30

Creality 3DPrintMill (CR-30) Belt 3D Drucker:

3DPrintMill ist ein Merkmal des unendlich langen Drucks und massendrucks, wodurch zeitsparend im Druck und kosteneffizient. Der spezielle Infinite-Z-Gürtel ist der erste Creality 3D-Drucker, der ein unendliches Bauvolumen der Welt realisiert.

Infinite-Z-Achse für Endless Printing: Ausgestattet mit dem rollenden Förderband realisiert es kontinuierliches Drucken. Keine Sorge, das unendlich lange Modell zu drucken. Hohe Produktivität, zeitsparend und kosteneffizient (Druckmaß: 200 * 170 * ∞mm) * Eine abnehmbare Verlängerungshalterung ist für die Installation verfügbar, um zu verhindern, dass das Modell während des Drucks herunterfällt.
Stabile CoreXY-Struktur: Die stabile und robuste CoreXY-Präzisionsstruktur mit gleichschenkligen Rechtecksunterstützung bietet Ihnen ein außergewöhnliches Druckerlebnis.
Nylon-Förderband:
Hergestellt aus verschleißfestem Nylon, zeichnet sich das Förderband durch eine hervorragende Haftung am Modell aus. Das bedruckte Modell kann automatisch abfallen, wenn das Band bis zum Ende rollt, wodurch Ihre Hand befreit wird Starke Haftung| Problemlose Entfernung | Verschleißfest| Ausgewogene Förderung *Einfaches Austauschen des Förderbandes.
Metallextrusionsmechanismus mit zwei Zahnrädern: Hochwertige Metallextrusion mit zwei Zahnrädern, kombiniert mit der 45 Grad schrägen Düse, die einen konstanten Druck von >200 Stunden ohne Druck realisiert.
Einzigartiger 45° Druckwinkel: Das einzigartige 45° Winkeldesign gleicht die Grenzen der vertikalen Düsenstruktur aus. Ausgestattet mit einem Hochleistungsdüsen-Kit erreicht es einen kontinuierlichen Druck zusammen mit der horizontalen Z-Achse.
Filament Breakage Detector: Wann immer es einen möglichen Unfall wie Filament-Run-Out oder Filamentbruch gibt, zwingt der intelligente Sensor die Maschine, den Druck auszusetzen. Der Druck wird nach der neuen Filamentzuführung automatisch wieder aufgenommen.
Ultra-silent Motherboard / Lüfter zum Abkühlen Sicherstellen / Fortsetzen des Drucks.

Time Lapse of #3DPrintMill Printed 6-Meter Rod

Creality CR-30 3D PrinterCreality CR-30 3D PrinterCreality CR-30 3D PrinterCreality CR-30 3D PrinterCreality CR-30 3D PrinterCreality CR-30 3D Printer
CR-30
MainboardFirmware, Troubleshooting
Video Guide 2
CR 30 leveling tutorial
Maker's Muse Creality CR-30 Review: Long sword(Model Print)
3D Printing Nerd #3DPrintMill Update! Long Profiles Prints
Video Guide 1
Creality 3DPrintMill (CR-30): Unboxing, assembled, set up, and first print!
Customer Reviews

Based on7reviews

  • 71%
  • 14%
  • 14%
  • 0%
  • 0%
Write A Review
Ask A Question
Becca
verified
This Cr-30 machine is a piece of junk. Everytime I start it to print something it prints it and then stops halfway through printing; no error, nothing, it just stops. The quality of what it does print is also really terrible. Most of the time all the different pieces end up melted together when they're not supposed to be. I've tried everything to fix it (re-leveling, changing nozzle and bed temp, reseting the boundaries, etc) nothing has worked. It's complete and total junk. My biggest regret is building it on the fourth floor and that's only because all the windows are panes so I can't open one to chuck it out of! I would not recommend this machine to anybody unless they want their hopes and dreams crushed. Hope you're having a good day because I'm definitely not
Owen Degen
verified
Creality machines are really conflicting for me, especially this one. Setup was almost flawless, until I ran into an issue or two where the instructions are blatantly missing steps, or where it requires two people to assemble for no good reason. Printer works well, but the included slicer doesn't work at all, you have to scour the internet for guides on how to get a slicer working. There's no information included whatsoever as to how to do any work on the machine, it's all guess work. The controller is cooled by a fan that has this grate in front of it that unnecessarily makes it sound like a jet engine. Now the nozzle smashes into the side of the printer whenever I stop a print, I have no idea if it's the machine or the weird slicer I have to use. Idk, it's as if someone cloned a really competent product, it can work if you're willing to put effort into it, but with just a few small improvements this printer could have been perfect, such a missed opportunity. Creality tends to take good ideas and machines and finds some way to screw it up, not to the point where it doesn't work at all, just so that you need to spend a few dozen hours doing their job for them. I regret purchasing this product, I can tell it's going to steal hundreds of hours of my time, it's already taken days of my life from me.
Scott Moxley
verified
Shipping to Canada, required duty (35$~) and was quick delivery ordered May 8th received May26th. The Assembly was quick as most parts are preassembled. It's a little slower printing than expected, as I have started the Benchy included and it's been 12hrs, but the size and quality are looking great so far. I strongly recommend people to join the discord groups and forums to trouble shoot.
vicente cuellar
verified
This printer is amazing, high quality results, prints really well, and set up is pretty straighforward. I though levelling and calibration would be difficult but it was easy. Print quality is amazing, and once you get you head around the 45º angle you end up using way less supports. I'm having a lot of fun with it and now is my favorite 3D printer.
Henry Doolittle
verified
You never have enough bag clips. You keep printing them and they get lost so you need to print more. I told cura to print cam lock bag clips and the printer started popping out bag clips every 2 hours until i told it to stop.
matt r
verified
I can't wait to try the cr-30 I been following it since the day it was brought to light.
Uziel Anaya2021-12-25 04:12:40 VERIFIED
Question: Hello, Will the CR30 print carbon fiber nylon? If not, are there are part available that might help achieve this? Any guidance or recommendations are very much appreciated. Thank you.

Answer: It is not recommended to use high temperature consumables such as PETG/ABS/Nylon, because the belt is recommended to be used in an environment below 80 degrees

Michal Horaczek2021-12-25 04:14:21 VERIFIED
Question: Hello, I have a problem with the adhesion to the belt. I see that adhesion in the central section of the belt (where most of my parts are printed) is much worse than on the sides. Could you advise how to get adhesion of central section of the belt back to it's nominal condition? Is there maybe a cleaning agent which could be used to clean the belt and regain adhesion? If yes, please advise how often cleaning should be performed. Thank you for the feedback in advance.

Answer: 1. Please wipe the surface of the belt with isopropyl alcohol 2. Re-level and adjust the tightness of the belt to ensure that the belt and the hot bed are tightly attached If you have similar questions, please contact us sale@creality3dofficial.com or cs@creality.com

gibbermagash2021-12-25 04:06:08 VERIFIED
Question: What are the outside dimensions of the printer? As in what sized space would it fit into.

Answer: It is about 535*656*410. If you want to add the detachable stand, it will take more space. https://www.creality3dofficial.com/products/creality-splice-bracket-set-for-cr-30

Creality CR-30: Der 3DPrintMill, Infinite-Z, Belt 3D-Drucker
-
£ 239
Added to the cart