Ender-3 NEO アップグレード 3D プリンター CR タッチ ABL インストール済み
$ USD
$ USD
Ship From
Model-1
Please select product attributes before purchasing~~
Ship to
It is expected to arrive within and will cost
$
USD to ship
This item can't be shipped to this Country/Region
Bundles
${ meal.title }
${ meal.skus }
${ sku.name }：
${ skuVal }
$${
meal.price }USD
$${
meal.oldPrice }USD
Quantity
28 Available
Add To Cart
Buy It Now
Ender-3 NEO アップグレード 3D プリンター CR タッチ ABL インストール済み
${propertiesText}
x ${productNum}
Added to the cart
Continue To Shopping
View Cart
People who bought this item also bought
スムーズな給餌
より大きな力を持つフルメタル押出機により、スムーズな送りが可能になります。
停電の恐れはない
停電時にデータを保存し、電源が再びオンになると印刷を回復する再開印刷機能により、成功率が高くなります。
強化された安定性
合金鋼モールドスプリングは、安定した印刷のためにプラットフォームを強力にサポートします。
Ender-3 NEO製品パラメータ
| ビルドボリューム | 220*220*250ミリメートル |
| 機械寸法 | 440*440*465ミリメートル |
| 印刷速度 | 最大 120 ミリメートル/秒 |
| 印刷精度 | ±0.1ミリメートル |
| レイヤーの高さ | 0.05-0.35 ミリメートル |
| フィラメント直径 | 1.75ミリメートル |
| ノズル数量 | 1 |
| ノズル径 | 0.4 mm (標準) |
| ノズル温度 | 260℃ |
| ヒートベッド温度 | 100℃ |
| サーフェスを構築 | カーボランダムガラス |
| 押出機 | ボーデン押出機 |
| 押出機材質 | フルメタル |
| 平準化モード | CRタッチ |
| ディスプレイ | 12864 モノノブ画面 |
| メインボード | 32 ビットサイレントメインボード |
| 印刷を再開する | はい |
| 定格電力 | 350W のリアリティパワー |
| スライシングソフトウェア | リアリティスライサー/ Cura/ Simplify3D |
| データ転送方法 | TF カード/ USB |
| 対応フィラメント | プレイ/ABS/PETG |
| サポートされる言語 | 中国語/英語/スペイン語/ドイツ語/フランス語/ロシア語/ポルトガル語/イタリア語/トルコ語 |
カスタマーレビュー
に基づく 6 レビュー
67%
(4)
33%
(2)
0%
(0)
0%
(0)
0%
(0)
Write A Review
Ask A Question
Vicky
Awesome service from Comgrow. Had an issue with a part and they were fast to reply, investigate and ship out a replacement part.
Mathias V.B
100% satisfait de cette imprimante :
(N'hésitez pas a regarder les images joints pour voir les rendus)
Les points possibles ;
1.Possibilité de reprendre une impression après coupure de courant
2.facile a prendre en mains et à monter : en effet j'étais novice dans le milieu et après seulement deux soirées j'ai pue commencé à imprimer.
3.grande superficie d'impression (220x220x250mm)
4.ecran facile d'utilisation et disponible en francais (même si le francais n'es pas des mieux traduit) permet de mettre en pause pour changer de filaments mais aussi modifier des réglages de température ou ventilateur dn cours de route.
5.auto leveling (attention il ne vous dispose pas des réglages du lit mais permet de corriger les problèmes lier au mauvais réglage(
6.Dispose de tout les outils nécessaires pour débuter (grattoir, pince coupante coudé, 3 clef à écrous, une buse de rechange, un tourne visse, un adaptateur micro sd vers usb et un lot de 5 clef a len)
Kimberly Gerlach
This is my first 3D printer. It was partially assembled. Assembling instructions had detailed enough pictures and parts were labeled clearly. I had to google how to do the manual bed leveling because there were no instructions for it. After that the machine does the leveling automatically. I had good print quality with no calibration. The ender 3 community online is huge and helpful and there are lots of mods if you want to customize your machine.
James Cheves
To be honest, I had really anticipated that putting this printer together wouldn't be much of a problem. However, trying to figure out some of the various orientations for the print head, z-axis, etc., etc., left me a bit befuddled. I think it would have gone better if the parts were individually labeled -- A1, A2, B1, B2, etc.. Also adding to MY confusion was the orientation. At 72, I may be an old fuddy-duddy, but back in the day, I managed to assemble various HeathKits with very little problems (aside from needing a certain amount of digital dexterity). Included was the printed assembly guide (Quick Start Guide), and nothing else. The Micro SD card had 3 files on it, two of which were .gcode (not very helpful for the assembly process). The third file was a .rar, which left me in a no-man 's land in terms of anything useful.
Eventually, by a combination of fussing, fuming, and outright swearing, I managed to get the mechanical assembly completed. Then the real fun began -- leveling the bed. Oh, my God, Harry!!!!!! Every twist I made seemed to produce opposite results. I had viewed various You-Tube tutorials, and thought I was well prepared, but this was not the case. Since I'm using OctoPrint, I was able to download and install the "bed visualizer", and after running through the process many times, I managed to get a configuration that allowed me to run through various tests without too much of a problem (patience and perseverance are the key here).
The included glass bed does a great job of providing adhesion -- so much so that the metal spatula is a must for removing prints. However, I found that by using another glass bed, with a piece of PEI on top, not only made for prints that were easier to remove, but also provide a 'mirror-smooth' surface on the bottom, which makes for a much nicer presentation if you're making name tags, etc..
Eddie Parks
For those of you just getting started in 3D printing. I highly recommend this printer. A friend bought the base model and between the two the few upgrades make printing that much easier.
Kyle
Very easy assembly. Took about 30-40 minutes. I was printing in about 15 minutes. Printed great after leveling. Really easy setup and came in good shape. The shipping was fast but it did delay one day which I wasn’t super happy but otherwise I recommend you buy. I’m so impressed and happy with it.
Jackson Gould
Q
When the Ender-3 Neo available? Does it use a Meanwell Power Supply?
A
It was a Crealiy Power Supply
Peng Chen
Q
The mainboard is the 4.2.2 or the 4.2.7?
A
The mainboard is the 4.2.2GD TMC2208 driver
peicre
Q
The advertising pitch says "full-metal extruder". is this really an all-metal hot end capable of high temperature printing or a scam lie?
A
I think you have some confusion, the extruder is the part that pulls the filament through the Bowden tube to the hot end. The original Ender 3 series printers all came with a plastic extruder that the arm (piece you push in to be able to manually feed filament through the extruder) would crack and break over time. this comes with the upgraded all metal extruder.
Coffeeaddict
Q
what is the environment operating temperature? I plan to use it in a room that could get down to 60 degrees F.
A
I've printed in a colder room than that but to keep it more controlled, I just got an enclosure for it. It depends what filament you use and your settings too. You should be fine unless it gets colder than that or you have cool air moving around it.
$
USD
$
USD
ADD TO CART
BUY IT NOW
Write a review
*Name
*Email
*Body of Review
*Rating
Customer Image
Submit Review
Ask a Question
*Name
*Email
*Question
Submit Question