Creality3D® Boutique Officielle! UE/US/AU/UK/FR/Italie En stock + de 3 à 7 Jours de la Livraison! De 30 Jours Politique De Retour!

Ender 5 plus l'imprimante 3D

  • En solde
  • Prix régulier $ 582.00 USD

Product Description

Les avantages Creality Ender 5 Plus

  • ン Imprimante 3D Cube Frameン Cadre cube très solide. Conception de boîte avec portique supérieur.
  • ン Format d’impression ultra grand-format ン 350X350X400mm. Répondez à un plus grand nombre de vos exigences en matière d’impression.  Votre idée ne devrait pas être limitée. Obtenez de meilleurs résultats d’impression et un modèle d’impression plus grand à la fois.
  • ン Nivellement automatique du lit préinstallé avec BL Touch tel que configuré. Il vous suffit de les brancher et commencer à imprimer!il peut mesurer avec précision l’inclinaison de la surface du lit, offre la compensation automatique pour l’axe Z pour l’inégalité de la plaque de plate-forme, facile à résoudre la défaillance d’impression causée par l’inégalité de la plate-forme, et de fournir un fonctionnement fiable avec toutes les surfaces de construction.
  • ン Dual Z-Axisン Stable Z-axis Plomb vis lecteur en douceur et stable. Le mouvement de la plaque de construction sera plus stable.     

Ender 5 Plus Unboxing Build & Set-Up

  

Ender-5 Plus peut imprimer Iron Man?

Creality Ender-5 Plus Bltouch Leveling Tutoriel

Creality Ender 5 Plus Firmware Clignotant (BLTouch Fix)

 

Imprimante 3D officielle Creality Ender 5 PlusImprimante 3D officielle Creality Ender 5 Plus

Imprimante 3D officielle Creality Ender 5 PlusImprimante 3D Ender 5 PlusImprimante 3D officielle Creality Ender 5 PlusImprimante 3D officielle Creality Ender 5 PlusImprimante 3D officielle Creality Ender 5 PlusImprimante 3D officielle Creality Ender 5 PlusImprimante 3D officielle Creality Ender 5 PlusImprimante 3D officielle Creality Ender 5 Plus

Creality Ender 5 Plus Review 2019 : Tests de 10 heures

Un volume de construction plus important, une nouvelle sonde de nivellement du lit, des composants améliorés : le Creality Ender 5 Plus veut surpasser son petit frère. Lisez notre avis pour voir ce que nous avons trouvé après 10 heures de tests.

Pour en savoir plus 

Paramètres Creality Ender 5 Plus

Méthode d’impression Fdm
Dimensions d’impression 350*350*400mm
montrer 4,3 pouces
Précision d’impression ±0,1 mm
Diamètre de la buse Norme 0.4mm
Quantité de buses 1
Température de la buse ≤260℃
Temperatur lit chaud ≤110℃
Modes de travail cartes en ligne ou TF sont imprimées ofline
Formats de fichiers STLン Odjン et tranchage
logiciel curaン Repeti-Host」 Simplifier la 3D
Paramètres de puissance Entrée: 100-240V AC;Sortie:DC 24V 21A; Max25A (max25A)
Matériaux d’impression PLAン ABSン Soft Glueン Woodenン Copper Containing」 Gradient, etc.
Consommables Diame 1.75mm
Poids net 18,2 KG
Taille de la machine 632*666*619mm
Poids brut 23,8 KG
Taille de l’emballage 730*740*310mm

Customer Reviews

Based on 39 reviews
67%
(26)
31%
(12)
3%
(1)
0%
(0)
0%
(0)
K
K.
Ender 5 Plus

1st 3D printer. My son suggested the larger version.

Product arrived with corner of box damaged, however the excellent packaging kept the printer safe.

Setup was easy and perhaps I got lucky with It. Other than the first print all prints were perfect. (I learned on the first print to shut energy saver off, mine is in basement and I need to keep bed heated entire printing time.)

Going to install a couple small upgrades I found on line, like hot bed strain relief and a spool holder with bearings for less resistance.

Don’t think it’s overly loud, but will look into the silent board.

Overall, very impressed, no regrets.

M
M.
Love it

It is my first #D printer. I was expecting startup issues, but that was really no problem. The first thing I did was making a 3DBenchy, and then I saw the only and first problem. Bed leveling! But the video delivered by Creality was great and now it is working fine! Thank you!

M
M.
3.75 stars

Right out of the box, I can tell there may be an alignment issue and there's not much I can do to fix that due to machining of parts. I was able to add shims to fix this and it rolled great after.

The T8 lead screw nuts are squealing so bad I had to shut it down. I tried realigning everything, squared up the rest of the frame, loosened everything and then re-tightened, but it only made it worse. I have some anti backlash nuts coming that should fix this issue.

I was expecting a silent board with TMC2209's or at least 08's but if they're on the new board, they don't have silentchop enabled. The screen options are fairly limited. You can't adjust your preheat temp to suit your needs.

All in all, after hearing this machine run for awhile with the motors running noisy, I have no choice but to upgrade to a 32bit board and change out the screen.

A
A.
Brilliant Machine overall

I bought this as an upgrade from the Ender 3 Pro and couldn't have been happier. The build volume is much better for larger prints. Shame it doesn't come with a mean well power supply and silent board as this would have made it the perfect printer. I ordered the upgraded silent board straight away and what a difference :) Shame about the fans now but compared to before, massive difference. This is the only upgrade I have done and it has worked perfectly as is. I don't see the need for any more upgrades and would recommend if you want to print bigger. I will get a new Ender 3 V2 when they are back in stock as I sold my other and regret it. Worth having 2 printers on the go to save time. I printed the Lego Man on it and looks great

A
A.M.
If you need the build area, this is undoubtedly the best printer on the market

I am currently printing Covid-19 face masks for healthcare professionals and both this printer and my Ender 3 are currently dedicated to this, running 7 days a week, 16 hours a day and sometimes longer, for the last two months.

Other than replacing the extruder with a cheap all-metal unit, fitting the Creality silent board and replacing the lead screw brass bearings with cheap delrin bearings (to remove z axis backlash) the printer is running stock.

The only real gripe I have is that after discovering Octoprint introduces artifacts even when hosted on a Raspberry Pi 4, I'm back to printing from SD. The problem here is that unlike the Ender 3, the Ender 5 + stock firmware doesn't have a refresh SD option. If you add a standard SD to micro SD adapter cable, like I did with the E3, then if you change the SD card the printer doesn't pick this up and the lack of a refresh option means you can't update the list of files to print without unplugging and replugging the adapter cable into the controller board - which kind of negates the whole purpose. If Creality could add this feature I'd be overjoyed.

The only other problem I've had is that sometimes I'll get a temperature trip warning during hot-end warmup to 255 degrees. This I think is a firmware issue because if I heat the hotend to 240 then 250 then 255 I don't get the error - and I've never had it fail during printing either.

Print quality is excellent. The slight Y axis ringing on the Ender 3 which is a consequence of the large moving Y bed mass (with a glass plate fitted) is not evident on the Ender 5 and the solidity of the mechanical design is excellent - I think this is clearly the way to build large-format printers. Bed stability and flatness are very good. Using a 25mm square piece of 0.5mm thick thermal silicone sheet in each corner, you do not need any clips to secure the glass plate.