V2.1 Reemplazo de la placa base, CREEALIDAD Placa madre original para la impresora 3D de la serie CR
- Placa base de control de reemplazo original 2019 Versión CREEALIDAD V2.1 Compatible para Impresora 3D de la serie CR
- Fácil operar: con la interfaz USB, puede funcionar con el motor E / Z / Y / X AXIS
- La placa de circuito está optimizada por circuito, resuelve efectivamente el problema de calefacción.
- Compatible con CR-10S, CR-X, CR-10S4, CR-10S5, CR-20, Cr-20 Pro Impresora 3D. Póngase en contacto con nosotros para obtener firmware o descargarlo desde: https://creality.com/download/
Had a bit of trouble with extruder done all testing so replace motherboard works perfectly an arrived in uk with in 2weeks very happy.....well done Creality
The V2.2 mainboard works great. But fair warning. Do not attempt to use a relay and PSU control with the v2.2 mainboard. I’m not certain of the cause but the use of a relay and the on/ off of the relay fries the stepper motors. Since the stepper motors are not replaceable on the 2.2 board. You are stuck with either going with a more modular board or buying a replacement as I did.
This updated main board arrived well within the timescale quoted and has breathed new life into my printer. Unfortunately the latest BL Touch firmware available from your site gave me problems trying to save the correct Z-offset value. Basically, I could make the correct adjustment but it would not store it. However, I downloaded the latest unified TH3D firmware which did store the correct values and now my machine is printing better than ever.