
TEST
$ USD
$ USD
Creality3D Ender 3 Max Neo, 4.3-inch LCD panel and with a double Z axis
Different materials - 4.3 inch LCD panel - Dual Z axis - Hot bed - Up to 260°C - USB/MicroSD - Metal Bowden extruder
300*300*320 mm Build Volume
Enables large model printing or more small parts printing at a time, vastly improving the efficiency and offering more creation possibilities.
Dual Z-axes Design
Perfect coordination among dual Z-axes, timing belt and dual motors guarantees the stability and higher printing precision.
CR Touch Probe Bed Leveling
CR Touch auto-leveling improves the efficiency by automatically measuring and adjusting the 25-point print height on the heat bed, making leveling much easier.
The 4.3-inch color knob screen that will dim out in 4 minutes without operation is an energy saver. Optimized with icons, the UI is more vivid.
32-bit Silent mainboard: the noise exposure is lower than 50dB. Enjoy cozy printing and have fun.
Built-in power Supply: 350W high-quality Power Supply. More secure and reliable, improving the stability and the sense of integration.
Comparing the Creality Ender 3 Max vs Ender 3 Max Neo
Ender 3 Max | Ender 3 Max Neo | |
Price Range: | $300 - 325 | $375 - 400 |
Extruder Type: | Bowden Single Gear | Bowden Single Gear |
Bed Type: | Carborundum Glass Bed | PC Spring Steel Bed |
Build Volume: | 300 x 300 x 340 mm (~12 x 12 x 13.5 in) | 300 x 300 x 320 mm (~12 x 12 x 12.75 in) |
Main Features | Afforable Price | CR Touch Auto Bed Leveling |
Meanwell Power Supply | Double Z axis | |
32Bit Tmc2208 Driver | 4.3-inch LCD panel | |
A Large Size OF Ender-3 | Semi-assembled | |
Other Features | All Metal Extruder | Filament Runout Sensor | Power Outage Recovery | All Metal Extruder | Filament Runout Sensor | Power Outage Recovery |
Integrated tool drawer, USB Connectitivy | ||
Built-in belt tensioner |
Thumbnail Preview | MCU | |||
![]() |
STM32F407VET6 Architechture: 32-bit Frequency:168MHz Flash: 512KB RAM: 192KB |
|||
Stepper Interface | 8 axis driver; 9 motor interface (2 z-axis share 1 driver) |
|||
Stepper Driver | No on-baord stepper driver (buy seperately) Supported Mode: STEP/DIR mode TMC UART mode TMC SPI mode |
|||
Heater& Temperature Interface | 4 heater: 1 heated bed ;3 hotend | |||
Fans | Controllable Fan: 3; Always-on Fan: 3 | |||
End-stops | x+,x-,y+,y-,z+,z- | |||
Connection | TF Card,WiFi module slot,USB-C interface,U disk | |||
Supported Firmware | Marlin 2.0.x Klipper |
|||
Features | 1.12C/SPI/SUART1 expansion ports 2.Boot0 button set 3.Built-in CAN transeivcer 4.EEPROM 4KB integrated 5.3D-Touch port... |
ITEMS | MCU | Stepper Interface | Stepper Driver | Heater& Temperature Interface | Fans | End-stops | LCD Interface | Connection | Supported Firmware | Features |
STM32F407VET6 32-bit |
8 axis driver; 9 motor interface (2 z-axis share 1 driver) |
No on-baord stepper driver (buy seperately) Supported Mode: STEP/DIR mode TMC UART mode TMC SPI mode |
4 heater: 1 heated bed ;3 hotend | Controllable Fan: 3; Always-on Fan: 3 | x+,x-,y+,y-,z+,z- | Supported LCD: MKS TS35 MKS mini 12864 v3 LCD 12864/2004 |
TF Card WiFi module slot USB-C interface U disk |
Marlin 2.0.x Klipper |
1.12C/SPI/SUART1 expansion ports 2.Boot0 button set 3.Built-in CAN transeivcer 4.EEPROM 4KB integrated 5.3D-Touch port... |
Based on 0 reviews
Write A Review
Ask A Question

