CR-X Pro con firmware táctil BL
| Aplicable a CR-X y CR-X Pro | descargar |
Creality CR-X PRO Impresora 3D con doble color, BL Touch Silent Mother Board Meanwell Fuente de alimentación y 2kg PLA Filamentos 300x300x400MM
- DOBLE EXTRUSOR & Impresión de 2 colores: Módulo de extrusora doble y dos en una extrusora. Esta impresionante impresora admite la impresión en dos colores, lo que hace que el modelo impreso sea más colorido.
- FUENTE DE ALIMENTACIÓN MEANWELL: CR-X Pro viene con una fuente de alimentación certificada ul. La fuente de alimentación Meanwell proporciona una seguridad de impresión mucho más estable.
- EQUIPADO CON BL TOUCH: , Impresora 3D CR-X PRO equipada con una sonda BL Touch Antclabs genuina para nivelación automática de cama de 9 puntos, algo que tanto los principiantes como los usuarios de nivel experto ciertamente pueden reunirse detrás.
- Todo EXTRUSOR DE METAL Y PANTALLA TÁCTIL: La impresora 3D CR-X PRO viene con pantalla táctil LCD de 4 pulgadas, más fácilmente cuando se opera la impresora. Todas las unidades de extrusión de metal estables en filamentos de alimentación y resistencia al desgaste.
- Placa base silenciosa mejorada: Placa base autodesarrollada industrial adoptada respaldada por el controlador ultra silencioso TMC2208.
| Tipo de máquina | CR-X Pro(Actualizado en 2019) |
| Tamaño de impresión | 300 * 300 * 400m; 270 * 270 * 400 mm (doble color) |
| Tamaño de la plataforma | 310 * 320mm |
| Diámetro de la boquilla | Estándar 0.4mm, puede ser en 0.2,0.3mm |
| Temperatura máxima de la boquilla. | ≤250℃ |
| Tensión de trabajo | 145 |
| filamento | Funciona bien con ABS y PLA de 1,75 mm. |
| Tamaño de la máquina | 550 * 400 * 650 mm |
| N.W. | 15kg |
| Tamaño del paquete | 640 * 540 * 340 mm |
Acerca de Creality CR-X PRO
I bought the Cr-X pro and initially I had a faulty mainboard which caused the motors to not push filament through the nozzle and instead they just went backwards a bit then forwards a bit and so on. I asked the support about it and after a while they told me it must be an issue with the mainboard and sent me a replacement. From then on I was able to print. Now for the actual review, because I am sure that this is mostly an isolated case and you will likely not experience this:
I am giving this printer 5 out of 5 stars because it prints perfectly. You set the distance for the automatic bed leveling once and then you're set to go. I haven't head filament jams once, my models come out perfecly with barely even visible layer lines even at high print speeds. The multi material printing is amazing and I especially had fun printing pla and pva together for some soluable supports. It had no issue with this and once again the prints were perfect. It's a really sturdy machine and it's basically plug and play.
Here are my retraction settings to eliminate stringing and oozing:
Retraction Distance: 6.5mm
Retraction Speed: 25mm/s
I am using Cura as my slicer so if you use something else you might need different setting. I would definitely recommend this printer and I hope you'll have as much fun with it as I'm having.
The auto leveling is such an amazing feature for this absolute behemoth of a printer, and the ability to switch between two colors or a different material is going to make all the difference when i comes to the things I intend to print. Setup took maybe 15 minutes, and after a bit of manual leveling from being wary of claims of auto leveling, the calibration cube I printed came out flawless. You're gonna want some massive desk space, obviously, but I've been waiting for a printer like this for /years/. This printer is so freakin' quiet, I was on a Discord call with friends, and with the printer maybe 2 feet away from my setup, they had no idea it was running.
