Tablero silencioso actualizado con TMC2208 Driver For Creality Ender 5 PLUS
Esta opción es la actualización separada para Ender 5 PLUS, sólo tiene que conectarlo y se podría empezar a imprimir.
Aviso: Esta nueva placa base silenciosa actualizada no viene preinstalada actualmente en Ender 5 PLUS.
-Súper silencioso y reducción de ruido. Utilice los controladores de motor paso a paso TMC2208, que son el componente clave para eliminar el motor de la impresora al imprimir.
-Bootloader preinstalado. El firmware puede ser modificado por ARDUINO o Cura con el cable USB.
-Preocupación por la seguridad. La protección contra fugas térmicas está activada, si la temperatura aumenta fuera de control, la impresora dejará de calentarse y se detendrá automáticamente.
- Conductor de motor paso a paso basado en TMC2208
- Voltaje: Funciona en 12V y 24V
Creality V2.2 PCB:
Diferente de la placa V2.2 regular, en la posición del chip del conductor del motor paso a paso, el valor de resistencia es diferente (se puede observar directamente en la placa base).
Convencional: R100 silencio: R150
Bought this to replace the stock board on a CR-10 S4. The board is an exact physical match to the stock CR-10 S4 board and installed without any issues. I flashed the board with TH3D's unified software for a CR-10 S4 with the silent board option uncommented. The board works great and now the stepper motors are quiet as church mice. Well worth the price.
Today i've changed my OEM board with the silent board and... wow! This is silence!
The noisiest part is now the powersupply fan, so that'll be my next target!
If you are new to 3D printing, then like me you might think that the noise from your 3D printer is not that bad, and even a little pleasant. Trust me, that will change. Just like the movie Frozen's "Let it Go" was a pretty song the first few times you heard it, after about two dozen times of hearing it, the pleasantness starts to wear off. After about 50 times of hearing it, you want to smash the DVD into pieces. That was my experience with the sounds coming from my Ender 5 Plus.
This silent board put an end to all those sounds. It was extremely easy to install. I started with switching the power wires first, one by one. Then I took the cables and switched them over one by one. The whole process took about 30-45 min. Now the only sound coming from my printer is the fan noise from my power supply.
I print often, so this was money well spent and I would highly recommend it to anyone buying a compatible printer.
It's an easy upgrade to the 2.2 Silent. The printer is quiet now with the sound only coming from the power supply fans (which are still too loud). However, you don't get the annoying sounds from the motor drivers. It's an upgrade but in reality for 2020, it should be standard on the 5 Plus because all other printers ship with quiet drivers. If this was 2012, that's a different story and it would have been acceptable.
To do the swap over, takes about 45 minutes. The main issue is that Creality hot glues the connectors and it takes time to remove the hot glue. Additional heat sinks would also be nice to keep the new board running cooler.