• Home
  • Collections
  • Verbesserte Silent Board mit TMC2208 Treiber für Creality Ender 5 PLUS

Verbesserte Silent Board mit TMC2208 Treiber für Creality Ender 5 PLUS

$ 85,00 USD $ 89,00 USD
8 reviews
Ship From
  • United States
  • China
  • United Kingdom
  • Australia
  • Czech Republic
  • Canada
Please select product attributes before purchasing~~
Apply to
  • For Ender 5 Plus
Shipping
This item can't be shipped to this Country/Region
It is expected to arrive within3 daysand will cost£10to ship
Quantity

Silent Board mit TMC2208 Treiber für Ender 5 PLUS

Diese Option ist das separate Upgrade für Ender 5 PLUS, stecken Sie es einfach ein und Sie können mit dem Drucken beginnen.
Hinweis: Dieses neue aktualisierte Silent-Mainboard ist derzeit nicht auf Ender 5 PLUS vorinstalliert. Anders als beim Regular V2.2 Board ist in der Position des Schrittmotortreiberchips der Widerstandswert anders (kann direkt auf dem Motherboard beobachtet werden).

Unterstützen:
- Schrittmotortreiber auf Basis TMC2208
- Spannung: Funktioniert auf 12V und 24V

Funktionen:

✔ Leise und Geräuschreduzierung: Verwenden Sie TMC2208 Schrittmotortreiber, die die Schlüsselkomponente sind, um den Druckermotor beim Drucken zu eliminieren.
✔Bootloader vorinstalliert: Die Firmware kann von ARDUINO oder Cura mit dem USB-Kabel modifiziert werden.
✔Sicherheitsbewärtigung: Der thermische Runaway-Schutz ist aktiviert, wenn die Temperatur außer Kontrolle gerät, stoppt der Drucker die Erwärmung und stoppt automatisch.

✔Easy to Operate- Unterstützt BL Touch, muss aber zuerst die Firmware flashen. Wenn Sie Firmware benötigen oder Probleme haben, zögern Sie bitte nicht, uns zu kontaktieren, wir bieten professionellen technischen Support für Sie.

ender 5 plus mainboardender 5 plus slient mainboardender 5 plus slient mainboard

 




Silent Board Firmware For CR10S
Ender-5 PLUS Firmware Upgrade Instructions - English
Multi language Verison
Ender-5 PlusMarlin1.1.6-HW-V2.2-SW-V1.70.3BLTouchMulti
Customer Reviews

Based on8reviews

  • 100%
  • 0%
  • 0%
  • 0%
  • 0%
Write A Review
Ask A Question
Mar
verified
KEINE WARE SEIT 5 Monaten! Ständige Emails wo man vertröstet wird !! Einfach nur enttäuschend nieeee wieder 50 Euro das Fenster raus geschmissen.
Dale Johnson
verified
Bought this to replace the stock board on a CR-10 S4. The board is an exact physical match to the stock CR-10 S4 board and installed without any issues. I flashed the board with TH3D's unified software for a CR-10 S4 with the silent board option uncommented. The board works great and now the stepper motors are quiet as church mice. Well worth the price.
Marco
verified
Today i've changed my OEM board with the silent board and... wow! This is silence! The noisiest part is now the powersupply fan, so that'll be my next target!
Jeromy
verified
If you are new to 3D printing, then like me you might think that the noise from your 3D printer is not that bad, and even a little pleasant. Trust me, that will change. Just like the movie Frozen's "Let it Go" was a pretty song the first few times you heard it, after about two dozen times of hearing it, the pleasantness starts to wear off. After about 50 times of hearing it, you want to smash the DVD into pieces. That was my experience with the sounds coming from my Ender 5 Plus. This silent board put an end to all those sounds. It was extremely easy to install. I started with switching the power wires first, one by one. Then I took the cables and switched them over one by one. The whole process took about 30-45 min. Now the only sound coming from my printer is the fan noise from my power supply. I print often, so this was money well spent and I would highly recommend it to anyone buying a compatible printer.
Al Chan
verified
It's an easy upgrade to the 2.2 Silent. The printer is quiet now with the sound only coming from the power supply fans (which are still too loud). However, you don't get the annoying sounds from the motor drivers. It's an upgrade but in reality for 2020, it should be standard on the 5 Plus because all other printers ship with quiet drivers. If this was 2012, that's a different story and it would have been acceptable. To do the swap over, takes about 45 minutes. The main issue is that Creality hot glues the connectors and it takes time to remove the hot glue. Additional heat sinks would also be nice to keep the new board running cooler.
dominic brunet
verified
Absoloutely incredible
Bálint2021-09-13 03:22:57 VERIFIED
Question: I'd like to order 2 pieces to Hungary. Could you help me please?

Answer: Hi, Please choose ship from Czech and add to cart, then you will receive it within 4-7 Business days

Andrew A Hayes2022-04-18 10:55:52 VERIFIED
Question: Is this board (Silent board for the Ender 5 Plus) 32 bit processing

Answer: it is 8-bit

Verbesserte Silent Board mit TMC2208 Treiber für Creality Ender 5 PLUS
-
£ 239
Added to the cart